To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

The bracket should be inserted into the bar as per photos 1 then turn the bracket anti-clockwise whilst twisting the bracket into the bar, once the bracket is at 90 degrees to the ridgi-bar simply turn and lock into position. Those would work in a garage, but these are for the inside of your home where you care about what they look like. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others.Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. If you're using this to barricade an inswing door and need to prevent kick-ins, you should probably get some longer screws.

our Ridgi bar brackets have a foam pad at the base which helps to reduce cold bridging and form a vapour check when screwed through the roof panel, they are in heights of 80mm - 280mm, the height of the bracket may be determined by the U value requirement, the deeper the cavity between the roofing sheets created the more insulation can be fitted so increasing insulation values.As the photograph bottom left below shows the brackets can be fixed in wet weather conditions as they have a foam pad fitted to the foot of the roof bracket which forms a water tight seal once the bracket is fixed, the foam pad also helps to reduce any cold bridging especialy on bracket to steel applications, the photo to the right shows the grid system fixed through the inner liner sheet into the roof support purlins, all ready for the top skin of roofing sheets to be fitted.