Our plastic shed base kits, manufactured by ProBASE, are designed for longevity. Made from durable materials, they resist weather changes, erosion, and wear and tear. With minimal maintenance, you can expect these bases to serve as a sturdy foundation for your garden sheds for many years. Can I use the plastic shed base for larger garden structures like log cabins or summerhouses? Make a timber frame to hold the concrete. If you are using a shed building kit, the materials for this will be provided for you. Firstly, lay out the shorter pieces of timber with the narrow side down and align them with the longer pieces to create a grid. From corner to corner, measure the diagonals for accuracy before you drill the frame together. With a ground spike for each corner, hammer into the ground until the spike top and timber frame are level and drill both together. At this time, also drill holes into the mudsill for the anchors. The holes should be large enough to let the anchors to pass through, but not gaping. Make sure the ground is level. Put the base where you want your shed to go (get some help to carry it into position), and fix it to the ground.

Then, you need to pour concrete into the timber shed frame. You can either mix your own concrete using water, sand and cement, or you can buy ready-mixed concrete for the job.Our advice is to have about 10% more concrete readily available - it is worth preparing more than you need, just in case. While the helpful hand at the lumber yard will probably mention this, it’s good practice to mention it again—make sure the ridge board is at least one size larger than the common rafters. For instance, if using 2×2 rafters use a 2×4 ridge board.For most people, therefore, ‘self assembly’ is probably the most practical approach to building your own garden summer house. You’re more likely to end up with the garden building you daydreamed about, without the problems that can emanate from selecting the wrong timber, fittings, joints or design. How do self assembly garden buildings vary? Make a statement or a talking point in your garden with this Outhouse Garden Shed, use it as a small storage shed or just as something that sits there for people to look at and admire the moon design on the door. Concrete: Decide what size shed you want to build and buy sand and concrete accordingly. A premixed dry concrete mix makes the job easier.

There are many uses for a new garden shed. It provides a great way to add storage space and is a means to tidy up your garage and garden. It can be a hobby room for amateur painters, or it can function as a shed or mechanical shop.A shed can be whatever you want it to be, but buying one can become very costly if it is ready-made and erected or if you have to pay someone else to build a shed for you. Our resident shed building expert Joel was the 2014 winner of Channel 4’s Amazing Spaces Shed of the Year having beat over 10,000 applicants to win. He returned to the show the following year as a judge. Steel Garages UK Building Solutions supplies and manufactures premium Steel Garages, Garden Offices, Workshops and Garden Sheds throughout the UK. We provide a wide range of off-the-shelf and bespoke solutions to meet your outdoor space needs and requirements at unbeatable prices. To fix the walls of the shed to the floor, it is advisable to fix pressure-treated timber plates to the concrete base using anchor bolts. When you come to erect the shed walls, you can screw them in through this plate. Step 3 - Building the walls of the shed

Shed base FAQs

Measure and mark both longer timbers with a pencil where the crossbeams are to be attached to it. Pre-drill two holes at each point you’ve marked. This will help to prevent the wood splitting when you screw the timbers together. Step 5: Fix the frame into the ground

Again, as this guide is for a basic shed construction of modest size, there will be no joists. However, it’s important to note joists are absolutely indispensable for structures of more pronounced size—for example a shed that could house a mid-size car should have at least a couple of joists running across the top plates. Once you have the roof shape figured out, cut your studs and place them 500mm or 600mm apart. For instance, a 3m stud-framed wall would have a stud at the two ends and others at 500mm, 1000mm, 1500mm, 2000mm, and so on. Decide on where you will put the doors and windows and make double studs on each side. The wall with a door or window will, therefore, use more studs than the wall without. The door can be the same height as the stud-framed wall. If not, you should add another stud between the header plate and the door frame.

You do not need a wooden shed floor unless you want one. It depends on what you want to use the shed for. If it is going to be a tool shed or used for garden equipment, you are probably better off only having a concrete floor. We are leading experts when it comes to the design and installation of steel buildings. Whether you require a structure for personal storage or require something more industrial, we can provide you with high-quality steel buildings that are fully CE marked and manufactured in the UK. We have a range of buildings for sale in kit form or can design a bespoke building specifically for your unique requirements. Although they’re great from the convenience standpoint if already in your toolbox, things like a nail gun or a jig saw are not absolute necessities, so don’t feel the need to go out and spend money on elaborate power tools.