Read Also: Different Types of Springs and Their Applications [Full Guide] The Function of Various Types of Screwdrivers

Here we’ll explain all the key technical features you need to consider and suggest some of our favourite screwdriver sets. Read on and you’ll find everything from screwdriver sets for the reluctant DIYer to the most proactive home improvement enthusiast. Phillips screwdrivers have an X-shaped tip that is made to fit inside the X-shaped notch of a compatible Phillips head screw. These tools were developed in the 19th century as an improvement over flathead screwdrivers because the shape of the screwdriver head provides better traction or grip when you are driving or removing screws.

It’s worth noting that metric bits have almost completely replaced Imperial-sized ones, but screws put in 50 years ago haven’t heard about this. Still, it’s possible to use a driver that’s slightly too small to loosen a screw, so it’s not worth worrying about having every possible size in your collection. A choice of the most common sizes, in both flathead and Phillips (cross-shaped) will do for most day-to-day jobs. On the upper part, either there is a hole through which a wire is passed, or this end is made flat so that when this part is fixed to handle, it does not allow the shank to move separately. These are generally made of carbon steel. #3 Blade Stanley always makes good-quality tools, and this set is no different. The blades are moulded directly into the handles to make them “virtually unbreakable”, and the handles themselves are large, with soft rubber for an excellent grip.

Before you buy the biggest set you can find, ask yourself what your priorities are – if you just want a set for occasional DIY, then you don’t need a 100-piece set with every possible head. Equally, if you need a set for specific technical jobs, in addition to everyday home DIY, then it pays to make sure you buy a set that covers every eventuality, and has a suitably wide range of head types and sizes. Handle, generally wooden or plastic handles, are fixed to the screwdrivers. To save the wooden handle from being broken, an iron is fixed to the handle.#2. ShankThe grip is usually made of metal, plastic, rubber, or wood. The handle is usually designed to exert maximum torque without your hand slipping. Plastic handles are commonly used because of their durability, but rubber grips are also added to provide comfort while using it. Everyday DIY is one thing, but screws are as common as nails in woodworking, and if you’re into building electronics the need for a specific tiny driver with an unusual head is a regular occurrence. Thankfully, you have plenty of choice when it comes to screwdriver sets that are suitable for any eventuality. Is 58 screwdrivers enough? Could you make do with 12? Does each one need a handle, or will a series of interchangeable heads work? Do you need them to be insulated? Or magnetic? What about hex, truss or Torx heads? If we showed you a set of 100 screwdrivers, would you think that was overkill? The middle part between the blade and the handle is called the shank. On its lower part tip or blade is made.

One of the greatest tool inventions ever made is the screwdriver. Screwdrivers were reportedly created in the 15th century, and as we moved into the 21st century, you could find them in almost every toolbox. If you’ve ever been to a hardware store, you’ve probably seen hundreds of screwdrivers in a variety of designs, sizes, and other characteristics. Actually, the type of screwdriver you use depends entirely on the type of recess or screw drive you use. A screwdriver is used for tightening or loosening the screw. A round rod with a flat end, having a handle at the other end, is called a screwdriver. The length of a screwdriver is measured, excluding the handle. The length of a screwdriver varies from 50 millimeters i.e., 2” to 18”.You might need to use an extension shaft with the screwdriver head if it isn’t long enough to meet your needs. The blade is the lower part of the shank. It is also known as a tip. This part is hardened and tempered. As its name indicates these types of screwdrivers are used for tightening or loosening different types of screws. These are available in small as well as larger sizes. Flathead screwdrivers have a handle of wood or plastic fixed to them. Sets that comprise a universal handle with many interchangeable tips are popular because they’re light and easy to carry, but once you lose one of the tips it tends to stay lost – they’re not very big and are often dull in colour. Lose too many and you’ll have to buy a new set of tips, or potentially replace the whole set. Can’t I just buy any old cheap screwdrivers?