If the handle of your machine faces out (as in the washing machine pictured) you may be able to release the catch with some garden wire or string trimmer line threaded around the edge of the door. Simply pull the wire or line sideways, gently but firmly, towards the handle to release the door catch and open the door. If it's clear, then you might need to give the machine a good clean. Mould, built-up grime and detergent can all contribute to bad smells. Most problems with detergent drawers can be fixed by giving them a good clean, and manufacturers recommend you do this regularly anyway. If your detergent drawer is actually broken, replacements can be bought from the manufacturer. Most front-loading washing machines are designed at the standard dimensions of 85cm high and 59.5 to 60cm wide. And most kitchen cabinets are also designed to accommodate this size. Follow our five easy steps and watch the video on How to clean a smelly washing machine. Washing machine has a burning smell

Unplug the appliance: Before attempting to remove the door, ensure that the washing machine is unplugged from the power source to prevent any accidents. Overheating – If you have used your machine consecutively for the past five hours it might just be overheating. Give it a break and try again later. As you release the end of the hose, the water should start to drain from the machine. If the machine was full, you might find that you need multiple containers to completely drain it.

Faulty Interlock

First unplug the washing machine and lay down some towels – water will leak out. Next, inspect the pump filter, which is typically situated at the bottom of the machine, and clear it of any debris. Some machines have a drain hose in the front of the machine. Place a flat tray underneath the end of the hose to catch the water and pinch the hose whilst you remove the plug. Unbalanced washing loads can also create lots of movement. For example, squeezing in eight large bath towels and a bed sheet is too much for a 6kg-capacity washing machine – it's bound to vibrate. To fix this problem, turn the machine off at the mains, and wait for five to ten minutes. After waiting, the machine should reset, and you should be able to open the door as normal.

If you decide to proceed and open the door manually to retrieve the laundry, be prepared with a mop and some towels to spread over the floor to catch the water. Indicates that your programme dial has been moved from its original position. Simply returning the wash dial to its original position will restore the light to its original status.If it's not a problem with overloading, it could be one of these issues giving you a washing machine that won't spin: If the handle on the washing machine faces the other direction, you can access the handle’s catch from the top of the machine. Some washing machine problems can be solved very easily using a few tools or even just by tightening a hose, while others may need the work of a professional. Read our tips and advice on how to fix some of the more frequent faults. The only downside to this is that washing on hot temperatures costs more. In our tests, we measure how much water and energy each machine uses, so we can give you an average running cost. Washing machine won't turn on or off My washing machine won't turn on If the bolts have been removed and it's still not working it might be an issue with the installation.

Make sure the door is closed tightly so that the washing machine will operate properly. If it isn’t, the washing machine may not work correctly and could cause damage to your clothing. Drive belt – Find out if the drive belt is the root of the problem by opening the door and trying to spin the drum. There should be some resistance – if the drum turns easily then the belt might need replacing. If the feet are level, then it might be the surface causing the issue. Uneven flooring can create a shaky machine so you can try sitting it on a sturdy piece of wood or old desktop and manoeuvre the corners to even it out.Other causes include a faulty drive motor or pump. If you're still not sure on the cause call in a professional to inspect your machine. Washing machine isn't heating the water Now, inspect the drain hose. Typically attached to the waste trap under the sink, the drain hose will be connected via a spigot. There are three likely reasons why your washing machine door won’t open so read on and we’ll explain what can be done to open it. But first things first, please remember to switch off and unplug your appliance before starting your fix. But if you're struggling to fit the machine under your worktop, you could try lowering the machine's adjustable feet to gain an extra few centimetres. If your washing gets to the end of each cycle but refuses to spin, it could be down to something as simple as overloading your machine, causing it to become unbalanced. If you've jammed in too many heavy towels, for example, the weight can affect the sensors and shut off the machine. Re-balance the load and try again.