We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk. You took the dryer apart, pressed the reset button, put it back together, and ran a dryer cycle—but your clothes are still super wet or super hot. The heating element may have an open circuit or an insulation fault that is causing the control board to display the E21 fault code. This is because the capacitor is actually a kick stater for the motor and by doing so you just did the capacitors job, thus confirming it is faulty. You should then inspect each of the cables that go from the control board down to the thermostats and the heating element.

The cover will usually be held into place by screws and will need to be levered off so you can break the seal. You should always make sure that the lint filter on your tumble dryer is cleaned out after every cycle. The Candy solution guarantees maximum comfort with minimum effort when you dry your laundry: a dryer with a higher door.This set of fault codes for many Candy Go models of tumble dryer models including both normally vented and condenser tumble dryers and may relate to any other Candy Hoover produced tumble dryer models. Regular maintenance using professional products will prolong the life and effectiveness of your appliances over time.

They will also often look the same or similar yet be different or, look totally different yet be completely comptible as they've been altered.Start off by inspecting the control board and look out for any signs of damage such as burn marks on the electrical tracks. Test it with a multimeter for continuity, if it is open circuit, that is brilliant, just replace it and the dryer will be back in business. Once you have cleaned out the condenser you should make sure that the thermostats have been reset and then test the machine. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. The burn marks that you’re looking for will usually be black and you won’t be able to rub them off with your finger.

Washer-dryers can both bring you convenience and save you precious space, which can be especially vital if you live in a small house or apartment. Thanks guys – your videos helped me diagnose a capacitor fault in my Hoover Vision VHC680-80 tumble dryer and gave me the confidence to disassemble the whole thing and replace it. Easy to use: The big door swings open smoothly and makes it really easy to stuff the 10kg drum full of clothing. If you’ve tried resetting the dryer and running a regular cycle but it hasn’t worked, take a look at those vents and ducts. It’s also a concern for safety if the lint filter overflows as it can cause a fire if the machine doesn’t cope with the excess lint.We have purposely not listed any Candy tumble dryer spares in this article as it covers multiple models from a vast range with numerous changes made to teh spare parts used and subsequent replacement spare parts. Heating elements for tumble dryers are usually fairly economical to replace and it’s definitely worth fixing your dryer if the heater is at fault. It’s a bit loud: The claimed 65db noise level isn’t far off the money, but this isn’t a whisper quiet option by any stretch. Only condenser dryers will have a condenser unit so if your dryer is a vented machine then you should move on to the next check. The Candy brand has multiple models of tumble dryers to choose from, with the Candy Grand O’Vita model being a popular one.