Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone.

Joint-It Fine can only be used where there is a permeable base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable.All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean annually to keep it looking new. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean every 3 to 4 months to keep it looking new. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT-IT residue is removed. Always sweep diagonally across joint. Traditional sand and cement methods of pointing are extremely time consuming and laborious. This simple to use, sweep-in jointing grout gets the job finished faster and stands the test of time.

Joint-It Simple can only be used where there is a permeable base. We recommend a 6:1 sand and cement base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable. Traditional polymeric sand or cement methods of jointing are extremely time consuming and laborious. Our simple to use, sweep-in grouting sand means gets the job finished faster and stands the test of time.

Joints must be a minimum of 3mm wide and 25mm deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Add more water: Add more water sparingly to help JOINT-IT flow into joints of the paving, working diagonally across the joints to ensure JOINT-IT has penetrated all joints of the paving. How to use Joint-It Simple, watch the video below for assistance and follow the instructions below and on the outside of each tub:- When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application.

Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. Joint-It Simple– can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. 1. Prepare The Area

Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted. Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint. Description Joint-It Simple 12.5KG Available In 4 Colours (select in the drop down menu) – new for this season! Joint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Approximate coverage using 4 size random paving per 20Kg tub is 12.5 sq m, depending on joint width and depth.