Every Corsair RGB Hub (whatever the kind) has room for 6 fans, so if you have a RGB Led Hub and a Lighting Node Core you will be ok any kind of fan you have (be aware that if your 7 fans are let's say LL and QL, you will have to connect each kind of fan to a different hub). Mixing different fans on the same hub can bring weird effects. Connect a CORSAIR RGB Fan LED Hub (sold separately) to control lighting for up to 6x additional RGB fans Setup: AMD 5800X / Gigabyte B550 Aorus Master / Gigabyte Aorus Waterforce 280X / Corsair Commander Core XT (with 3xQL 140 and 2xQL 120 Fans + 2xCorsair LS100 450mm and 2x Corsair LS100 250 mm) / Corsair Lightning Node Core (with 3xQL 140 and 2xQL 120 Fans) / Corsair iCue 7000X / Lian Li Strimer Plus (Mainboard + Triple VGA, NOT connected to Corsair) / MSI 3080 Ti Suprim X / AMD 5800X / 16 GB DDR4 Gigabyte Aorus (4400 Mhz CL 19) The led strips in the box are connected to a small circuit and from there to the RGB input of the Commander XT. If I had your same configuration, I would mount the H150i ELITE CAPELLIX atop. Using its included COMMANDER CORE, I would then connect the H150i's three fans and three front fans. The remaining four fans would connect to the COMMANDER CORE XT. This is illustrated below. My reasoning behind having the front and top fans on the same controller is for iCUE's sequential lighting effect.

Commander Core and Commander Core XT, only one is detected? Commander Core and Commander Core XT, only one is detected?

Finally, the LCD kit is connected to the CPU_FAN port of the mainboard, and all controllers/repeaters are connected to the power supply via the SATA power cable. I need some assistance, I've spent hours researching and I'm understanding most of it, but not all. Q: What about my LED strips? Do I still need to use the iCUE Lighting Node Pro RGB Lighting Controller? Hey' can anyone help me with a issue I'm having which I noticed after replacing the first Faulty Fan. I understand some RGB may behave funny but I'm not super bothered about that as long as they all light up :D

Example - iCUE 5000x RGB withH150i Elite LCD (XT) and 7x QL120 RGB fans

Your ML-Elite and SP-Elite are a perfect match, 8 LEDs center and same color tone. The LL is going to be the oddball in the mix. It may look just fine (rear exhaust?), but be aware nothing can make the other fans do the "ring style" effects native to the LL or QL series. Using the Core XT is less expensive than multiple Commander Pros AND less clutter since the Pro ALSO requires separate RGB hubs for control fan lighting. I might move the rad to be mounted on the roof then I can fit the 4 fans, unfortunately due to 3060TI size and Motherboard (mATX not mITX) I cannot fit fans on the bottom.

Corsair Commander Core XT vs PRO - Which one should you Corsair Commander Core XT vs PRO - Which one should you

and why dont you try saying you have the fans you have in icue or pic the ones with the most RGB and the other will do the same but you wont have all the rgb on the fans itself? i mean lets just say that the LLs have 30 RGB LEDs for simplicity and the MLs have 15. you pic the LLs in icue as all your fans and all 30 LEDs of the LLs light up and the 15 on thje MLs Honestly I'm a little frustrated with corsair about the ml120 rgb pro fans for sale separately. They only have 4 leds per fan, while the ML120s with the h150i elite capellix are 8 rgb per fan. I wanted them to all match. It seems like going with sp120s might be the best from an rgb asthetics point of view, but I'd prefer magnetic levitation ones if they were available with the same 8 rgb leds per fan. Since multiple Core XTs can be used, I plan to use 2 XT to run 13 fans. Note that 3 fans will be controlled by the AIO, with the remaining 10 connected to the Core XT ( I think 😉 ). On the 2nd USB Lighting Node I just have the 2 QL 140mm Fans lighting wires connected, because I have the Fans powered by the NZXT Z63 and I can control the RPM through NZXT CAM.Otherwise I do not know what to do. Obviously the Commander Core is the ideal product because I would rather have just two sata devices plugged into my case instead of 4 or 5. Intelligent fan detection simplifies the fan setup process, allowing iCUE to automatically identify the specific fan model connected to each RGB port.