The Mustang Tile Levelling System is also available as a starter kit in a handy tub that contains 100 x Mustang base clips (1mm, 2mm or 3mm), 100 x Mustang wedges and 1 x Mustang precision application tool. These are extremely useful for smaller installations or where only a certain quantity of base clips are required. How to use the Mustang Tile Levelling System: To facilitate this operation, the use of the traction-adjustable Raimondi Tile Levelling System pliers is recommended. A Raimondi Tile Levelling System Starter Kit is also now available from the drop down menu above, which is comprised of 250 x 1.5mm 3-12 Spacer Clips, 250 Wedges and a pair of floor levelling pliers.

Raimondi Tile Levelling System - Tiling Supplies Direct

The Mustang Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in a grout joint between two tiles. A plastic wedge is then driven by a pair of specially designed pliers into the aperture in the centre of the clip until it sits flush on the surface of both tiles, so that they are both level. Once the tiles have set, the clip is easily broken off, leaving only its base bedded in the adhesive under the two tiles. The Mustang Tile Levelling System plastic wedge is fully re-useable, which saves costs on further jobs, as you only need to buy clips.Also available is a anti-chipping/anti-scratch plate that can be used in combination with Raimondi Tile Levelling wedge/clip system to avoid potential accidental damage during installation of tiles that have a particularly delicate top finishing. You place it in between the wedge and the tile by inserting it on the clip before wedge insertion. The anti-scratch plate performs two functions at the same time: Anti-chipping since it prevents the stems of the Raimondi Tile Levelling System clip from touching the edge of the tile during wedge insertion thanks to a dedicated L-shaped tab; And prevents scratching by ensuring the wedge does not touch the tile but slides on the platform instead.

No Nonsense LSPC-2-SET Tile Levelling System Kit 201 Pieces

After having spread the adhesive, insert the Raimondi Tile Levelling System clip (base/support) underneath the tiles and along the 4 sides.The Raimondi Tile Levelling System is a revolutionary new way of ensuring that all your tiles are perfectly level with one another. The Raimondi Tile Levelling System uses special traction-adjustable pliers that are available in two different versions, one for floor applications and one for wall applications. Insert the Raimondi Tile Levelling System wedge in the clip (base) slot, using the Anti-chip/scratch plate if required, paying attention not to pass the breakpoint. The threaded spacer clip is inserted underneath the tile edge into the adhesive bed, before the adjacent tile is laid. The Raimondi VITE Tile Levelling cap is then threaded onto the clip and tightened until the tiles are level. The cap is ergonomically shaped with finger grips to be easily tightened by hand and spins freely, so that caps can be placed and spun down to the tile surface in 1 second. Once the adhesive is set, the protruding part of the support has to be separated from the base, which is embedded beneath the tile edge. This can be done using a Raimondi White Rubber Mallet to avoid marking the tiles (or with your feet). Beat parallel to the joint.

Tile Levelling System - Tiling Supplies Direct Mustang Tile Levelling System - Tiling Supplies Direct

The Raimondi VITE cap also features a hollow design so that users can see the grout joint easily on intersections. Remove: Allows for an innovative removal of the clip once set by setting the tightening torque on the driver to its maximum setting, tightening the cap until the clip breaks. If you are using this system over a large area with a lot of clips, the Raimondi LEVMATIC Battery Powered Levelling Pliers makes pushing the wedge into the clip effortless and reduces fatigue. The Raimondi VITE Tile Levelling System is a tool-less tile levelling system comprising of a threaded cap and clip that is tightened by hand. The Raimondi VITE Xpress tool can be used on both floors and walls, and works with individual caps as well as caps with anti-scratch washers.

Once the adhesive is set, remove the cap by beating it with a Raimondi White Rubber Mallet to avoid marking the tiles (or with the foot). Beat parallel to the joint line. As an alternative, unscrew the cap, remove it and beat directly on the clip (parallel to the joint line). The use of the pliers is recommended and is facilitates accurate levelling and speeding up the insertion of the wedge in the clips. They also optimize the pressure on the tiles being levelled. The Raimondi Tile Levelling System is comprised of a thin plastic clip that is designed to be fitted in a grout joint between two tiles. A plastic wedge is then driven by a pair of specially designed pliers into the aperture in the centre of the clip until it sits flush on the surface of both tiles, so that they are both level. Once the tiles have set, the clip is easily broken off, leaving only its base bedded in the adhesive under the two tiles. The plastic wedge is fully re-useable, which saves costs on further jobs, as you only need to buy clips. Screw: Allows fast tightening of the cap onto the levelling clip until it sits onto the tile. A consistent tightening torque setting on the drill clutch can be utilised to achieve a consistent perfect level across the entire surface.

Spacers and wedges | Topps Tiles Spacers and wedges | Topps Tiles

Pull apart: When separating the broken off clips/caps when the levelling job is finished can be sped up by using the drill on a reverse rotation to remove the cap from the used clip.