Off when the parent unit is disconnected from AC power, or when the parent unit is connected to AC power and the battery is fully-charged. Parent unit, baby unit 1 and baby unit 2 (*For RM5764-2HD only) are connected to home Wi-Fi network. Additionally, soothing sounds and lullabies play right from the camera unit to help baby sleep tight. Plus the built-in temperature sensor will let you know with an alert if the nursery is getting too hot or cold so you can adjust the thermostat. After installing the mobile app, follow the instructions in the mobile app and parent unit to set up and pair your baby unit.

Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound.

Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby's crib or playpen. on purchasing your new VTech product. Before using this HD video monitor, please read Important safety instructions.

With Router Mode, the parent unit and camera are paired to operate via the WiFi router, this also allows To ensure that your HD video monitor is always at its best performance, the parent unit will prompt a message and ask you to update its software and the baby unit's firmware when there are new versions available. Can pair, view and control up to 2 cameras on the parent unit & the VTech app (RM724 sold separately). Multi-cam viewing modes are single cam, split screen or patrol mode. Onboard recording of 10 second video clips to camera for motion detection - viewed and deleted via the app Camera lens and surface may get warm during normal operation. Charge the parent unit battery before use

Continue as a Guest

The camera transmits 1080p high-definition video, so you can clearly see your little one the parent unit, your smartphone or tablet. You'll feel like you've never left the room Remote viewing / recording via the free VTech app – record images/video to your smartphone/tablet memory using the app

Connect the power adapters in a vertical or floor mount position only. The adapters' prongs are not designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to improve the signal strength. You can also set up Router mode to connect via your home Wi-Fi network to improve the connection between your parent unit and baby unit. Direct Mode - the monitor is ready to use out of the box for local monitoring between parent unit and camera i.e. there is a direct link between parent unit and camera that establishes automatically, no additional set-up required. Super smart, you can use voice commands to view the VTech camera on compatible Google Assistant devices. While viewing image from the baby unit, press to pan the baby unit leftward, upward, rightward or downward.

You will have remote access from your phone, be able to record your viewing as pictures or video. Two Way communication, 5 soothing lullabies and 4 natural sounds to help baby to sleep. Router mode uses your home Wi-Fi network to connect your video monitor. It supports streaming live video through parent unit and smartphone app. This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. With Direct WiFi Mode on the VTech RM5764, the monitor is ready to use out of the box for local monitoring between parent unit and camera. IMPORTANT NOTE: PERFORMANCE OF YOUR BABY MONITOR IS DEPENDENT UPON THE RELIABILITY OF THE DIRECT WiFi OR ROUTER MODE CONNECTION STRENGTH IN THE HOME

Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets. Remotely listen and view on multiple devices, even outside the home. This system allows for local and remote viewing through the app with no fees or monthly subscriptions Follow the instructions on the parent unit screen to update your HD video monitor. If you skip the updates, the parent unit and baby unit will be updated automatically when the parent unit is powered off, and then powered on again. Federal Trade Commission: Using IP Cameras Safely – https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).For access inside the home, an internet service is not necessary i.e. if the internet service is unavailable, provided either Direct WiFi or Router modes can be accessed, the RM will continue to work inside the home. VTech 5-inch Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby when you are on the move or away.