This sensitive hand-held scanner comes complete with an antenna, AC adaptor, belt-clip and manual. The frequency range is 25-960 MHz (with gaps) and has a maximum of 500 Channels. See specification below. The box includes a UBC125XLT scanner, antenna, belt clip, hand strap, 2 x AA rechargeable batteries, USB cable, Euro, and UK AC/DC adapters, hand strap, and owner's instructions manual.

also ensure you install the Scan125 according to the Driver Installation Instructions and the Program The UBC125XLT has a good-sized screen and a keypad as well as many different features such as 'Close Call' which will detect nearby signals. Uniden UBC 125XLT is a quality handheld scanner in a stylish compact design that is made from robust materials. Uniden UBC 125XLT is designed for indoor and outdoor activities in the professional world. The programmed channels are grouped into 10 Banks with 50 channels in each. In this way Uniden UBC125XLT is very easy to use once the interesting frequencies are programmed. Uniden UBC 125XLT has Close Call and 10 preset frequency bands with e.g. Maritime, Air traffic, CB channels and PMR446 frequencies. This radio scanner also contains a wealth of opportunities to manually stop the scan, skip to the next active channel etc

Current Release - V3.6.0.0 - 01 August 2023

With this scanner you can program in your frequencies by connecting the scanner to a computer. Below are some software links for the Bearcat UBC125XLT: When using a scanner you can either use the 'Search' mode where it searches through a range of frequencies until it stops when it finds a transmission for you to listen to, or use the 'Scan' mode where you store specific frequencies into the scanner and it will just scan through these frequencies until it finds a transmission. A scanner usually lets you set either AM (Amplitude Modulation) or FM (Frequency Modulation). The scanner may also have NFM (Narrow FM) and WFM (Wide FM) but for listening to aircraft transmissions you should only use the AM mode. The Scanner's memory is used to store your frequencies which are usually arranged into Banks and Channels. A Bank consists of a group of Channels and you can program a frequency into a Channel. The idea is that you could fill a Bank with specific frequencies for a particular airshow and just scan the Channels in that Bank. You could use other Banks to store Display Teams and/or Common Display Frequencies (used at many airshows). This helps to organise all the frequencies that you want to store on the scanner. Note that all scanners work slightly differently and you should always consult the manual for your particular model. This scanner is cheaper than the Uniden Bearcat UBC3500XLT (now discontinued) but is still capable of receiving both civilian and military aircraft transmissions. It will also receive emergency, marine, amateur (ham radio) and other communications.

UBC125XLT, BC125AT/UBC126AT and Albrecht AE125H Scanners) Please Donate to my supported charity which I would NEW - Uniden UBC125XLT is a compact 500 channel handheld scanner, frequency coverage from 25-88MHz, 108-174MHz, 225-512MHz and 806-960MHz with 5/6.25/8.33/10/12.5KHz frequency steps. The Uniden Bearcat UBC125XLT is a very popular hand-held scanner for listening to airband transmissions and can be bought for a very reasonable price compared to other scanners. To receive civilian aircraft transmissions you will need a scanner that has a frequency range of 108-137Mhz. If you want to listen to military aircraft transmissions then you will need a scanner that has a frequency range of 225-400MHz. You should also set the scanner to the AM mode (Amplitude Modulation). The Step size will depend on the scanner and some can scan through a list of frequencies using the following steps:- 5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 50, 100kHz. Using the correct Step size will mean that you don't miss any frequencies. Recently the spacing between airband frequencies has been reduced from 25KHz spacing to 8.33KHz spacing so as to increase the number of frequencies available. Therefore your airband scanner should have a step size of 8.33KHz.