Also remember to insert a regular pellet behind the felt pellet if you are using them in a springer, as the piston needs the protective cushion of air that a felt pellet alone can’t provide. I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch.

clean your PCP gun barrel - Airgun Magazine How to clean your PCP gun barrel - Airgun Magazine

When using any type of bore-cleaning or conditioning product, less is more – and that’s especially so with abrasives like bore paste A: The kind of cleaning kit you’ll need for your air rifle will depend on the calibre of your airgun. Most air rifles are .177 or .22 calibre, so you’ll need a kit that includes a bore brush for those sizes, as well as suitable oil and cleaning pellets. You may also want to get a pull-through cleaner, which can be helpful in getting all the dirt and grime out of your barrel. Q: How do I clean my air rifle barrel? The easiest way to insert a pull-through is directly into the barrel – this BSA Ultra XL makes the job easyAirgun oil: Aerosol oils like Power Airgun Oil can be sprayed down the barrel to help loosen lead deposits before cleaning begins in earnest. The same oil can be sprayed on the patches for use with the pull-through. Gun Cradle: Some way to hold the rifle steady is a must. This particular Gunsmith’s Maintenance Centre from MTM is about 13 years old and is still going strong. Gunsmithing Service – We would be happy to give an estimate on any gunsmithing requirements. Tailored gun fitting sessions are also available. Bore pastes are grey to begin with, so that will account for some of the discolouration on the used patches, but the results were nevertheless incredible.

Napier Pull-Thru Cleaning Kit - Airguns of Arizona Napier Pull-Thru Cleaning Kit - Airguns of Arizona

x 120ml Power Airgun oil Pump Spray (This contains exactly the same amount of active ingredient as the 200ml Aerosol version) Looking to keep your Air rifle in top shape? We've got you covered with this simple cleaning guide that will have your Air rifle looking like new in no time!

Air Pistols

A: The best way to clean your air rifle pellets is with warm, soapy water. This will get rid of any dust and debris. When dried, they should be lubricated with oil to prevent oxidation. Cleaning air rifle pellets may improve accuracy and prevent fouling. Q: Can I use WD-40 to clean my air rifle?

Napier Power Pull Through Kit – Redbeck Shooting Supplies

A: How often you should clean your air rifle will depend on how often you use it. If you never use it, you won’t have any real need to clean it (provided that it’s stored correctly). A well-made air rifle won’t need to be cleaned each time it’s used, and if anything, cleaning too often can actually risk damaging the barrel. All of that is to say that you only need to clean your air rifle if you notice a decline in accuracy, or if you want to experiment with a new kind of pellet. Even then, many people recommend never cleaning an air rifle at all. Q: What kind of cleaning kit do I need for my air rifle? Air Rifle Repair Centre – We have experienced members of staff that have been repairing and servicing airguns for many years. The Napier Airgun Pull Through Kit comes complete with 100 Power pull through patches, ensuring you'll have plenty on hand for multiple cleanings. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version. Convenient and Portable With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport. Perfect Choice for Airgun EnthusiastsPerfect cleaning kit for PCPs. Other brands might be cheaper but you always know what you’re getting from Napier and it’s never poor quality. Scroll down to watch the video below for detailed instruction on how to use the Power pull through kit. Complete Air Gun Cleaning Kit

Napier Pull Through Air Rifle Cleaning Kit | Wolfman

If you need a catch-all cleaning solution for your air rifles then this is it. The pull-through will work with PCPs, springers and gas-rams, and the pull-through won’t care if your gun has a fixed barrel or is a break-barrel. Did these guns shoot any better afterwards? To be perfectly honest, no, not really, but then they were shooting well to start with. In one case I actually thought I had done more harm than good as it took an incredible 62 shots to re-lead the barrel and get it shooting well again. Felt cleaning pellets are the simplest of all the bore cleaning methods, with a cleaning pellet being inserted into the breech and being fired as normal. Take six or so pellets and soak three with some sort of solution, such as Napier Power Pellet Lube, but leave the remaining three dry and shoot these last.

Want to achieve the ultimate in accuracy? The secret is simple: regular cleaning and relubrication of your barrel. A drinking straw can be useful when trying to guide a pull-through down a shrouded barrel where the muzzle isn’t always easy to find Drinking straw: A straw gives the pull-though a head start any time you’re trying to clean a barrel that doesn’t offer direct access to the muzzle, such as a shrouded barrel with a non-removable end cap.