The voltage supported by Retevis RT95 mobile radio is DC12V-DC13.8V The recommended current is 10A. When this function is turned off, the product needs to press the button to enter the power-on state when it is connected to the power supply. Q: The Retevis RT95 Mobile radio microphone cannot get any sound through the built-in speaker, what should I do?

Rotate the channel switch to select the desired offset frequency, and press the FUNC key to set the offset direction; If the computer does not prompt, and the port and program cannot be found, then you need to install the driver, Some repeaters require the walkie-talkie to transmit a repeater tone. The walkie-talkie can only connect to the repeater after the repeater allows it. A: 1. This is related to the voltage of the machine itself. The standard voltage of the car radio is 13.8v, and half of the voltage transferred from the adapter is 12v. If RT95 is manually set, there will be a relay setting menu. In the function setting of the whole machine,

Leave a comment

Retevis RT95 Mobile Radio is a 25W long Range Dual band mobile car radio transceiver, it has nice housing, stoutness & stability, advanced and reliable functions, perfect & valuable. This mobile Transceiver is especially designed for drivers and it pursues the philosophy of innovation and practicality. This article mainly organizes the questions about Retevis RT95 mobile radio from customers, hope it can help you. FAQ for Retevis RT95 Mobile Radio Transceiver A: The quality of the received signal is related to two aspects, one is the quality of the transmitted signal itself; the other is the receiving sensitivity of the receiver. A: Retevis RT95 Mobile radio has scanning function and cannot scan multiple frequency bands at the same time. A: Do not set the non-integral frequency point of the walkie-talkie, the whole frequency is easy to be interfered; please try other non-integral frequencies to work.

Q: Does the Retevis RT95 Mobile radio have a scanning function? Can I scan multiple frequency bands at once? A: You can set the horn switch through the software, select the host to open, the hand microphone to open Turn on the negative difference frequency direction function, that is, the transmitting frequency is lower than the receiving frequency; Press and hold PTT key on the external speaker mic. MODE no. Change to blue color, then rotate the channel knob to choose the frequency band you need.

A: HI, MI, LO refer to the high, medium and low power respectively, The voltage supported by RT95 is DC12V-DC13.8V. The recommended current is 12A. When the voltage cannot reach or is insufficient, choosing high power may not be able to transmit. Low power can transmit normally, please use standard voltage 13.8v. Press the [PUSH] key to enter the menu setting, and the characters corresponding to the menu change items on the screen will turn green;

A: Yes, Retevis RT95 mobile radio has scrambling function, this function is similar to the encryption function, which allows the decoding radio to listen more clearly. Q: Retevis RT95 Mobile radio MI and HI, LO what do these mean? What is the main role? Is it normal that MI and HI cannot be used? After setting the pilot frequency, select the repeater frequency, and then press the PTT+DOWN button Usually, as long as the relay station is woken up, it is not necessary to send the pilot frequency again.A: Generally, the USB program cable needs to install the driver. You can install the program cable to the computer first. If the computer is prompted to install the driver by itself, then there is no need to install it manually.

A: If the mobile radio cannot be used normally due to misoperation or setting error, you can use this function to restore all settings and channels of RT95 to the factory state. However, the power of the radio will be reduced because the applicable voltage of the RT95 standard is 13.8V Whether the current is enough, if the current of 12A is not reached, high-power transmission will be prohibited. A: This function is used to wake up a dormant relay station, which requires a certain strength of pilot frequency to wake up.Turn on the function of positive and negative frequency direction, that is, the transmitting frequency is higher than the receiving frequency;