Das TBS® PRO-System ist eine ultraleichte Version, bei der die Gurtbänder durch leichte Abspannbänder ersetzt werden. Die Schnallen und Einstellvorrichtungen wurden auf ähnliche Weise reduziert. Once blown up, the tent is incredibly simple to erect; the inner and outer go up simultaneously, so it's just a case of pegging it out. It’s well-ventilated, which helps reduce condensation, especially with the sizeable O-shaped door, which opens up the tent. There’s only a single entrance, but it has a decent-sized porch plus a handy rear storage area with an unusual ‘hatch’ in the mesh inner that allows you to reach through and stash small items of kit. The end walls are also fairly steep, especially at the head of the tent, which means you ought to be able to lie out comfortably even if you’re well over 6 foot tall. The width isn’t class-leading by any stretch, but should still accommodate all but the chunkiest sleeping mats. Optimal positionierte Innenzelttaschen bieten Stauraum für Zubehör wie Taschenlampen oder Elektrogeräte.

The flysheet and groundsheet are made from a silicone-treated ripstop nylon with a 1,200mm hydrostatic head rating and an additional PU coating, while the tent inner is a breathable ripstop nylon with polyester mesh. All seams are taped with a waterproof, solvent free PU tape and the poles are DAC Featherlite. Never cook inside: Primarily for safety but cooking also releases large amounts of moisture into the air. Remember that extractor fan in the kitchen at home? The breathable ripstop inner fabric allows condensation to pass through, for a comfortable night's sleep, and the 70D ripstop bathtub groundsheet offers 10cm of waterproof protection at the base. Die Belüftungen sind mit Moskito-Gaze versehen. Eine gute Belüftung reduziert die Kondenswasser bildung und die Gaze halten Insekten fern.The flysheet is made from a TripleRip silicone coated polyamide with an impressive waterproof rating of 3000mm (hydrostatic head). Cleverly, the upper parts of the fly have a 20D strength rating while the lower parts, those more at risk of abrasion, are rated at 40D. The inner features a 15D ripstop polyamide, a super fine bugproof mesh, and a 40D polyamide bathtub style floor with a 4000mm hydrostatic head. The poles, on the other hand, are made from a DAC Featherlite NSL, whilst the pegs are v-shaped and made from DAC aluminium alloy. All the materials here are made without PVC plastic and have a PFC-free DWR treatment. Don’t pitch too close to water: Rivers and lakes can increase humidity. Pitching your tent, a little further away from water sources can help reduce condensation. One of our lightest flysheet constructions, ProTex® 15.SRN is made from high quality, 15 denier ripstop nylon fabric which is extremely strong, while retaining an incredibly low weight. Fully seamed taped with silicone coating, ProTex ® 15.SRN creates completely waterproof shelters for fast and light expeditions. Lightweight tents are designed to be used quite successfully without any form of groundsheet and we would only recommend taking one if you expect to be camping on hard, stony ground or you want to actively extend the life of your tent and don't mind the extra weight.

Part-mesh inner door and high flysheet vents help to reduce condensation by providing a through-flow of air, and a gear loft stores all your essentials. This design gives a relatively large sleeping area, with 1.2 metres of height and 2.4 square metres of sleeping space. On top of that, you’ve also got the benefit of a 0.8 square metre porch, providing plenty room to cook and organise your kit – something we feel is an essential feature in single skin tents to avoid touching the potentially damp walls of the main compartment. It’s a hybrid tarp / tent design that features a single skin of silicon coated polyester upper that’s suspended off a trekking pole. This upper is pegged down at the edge and corners to form a hexagonal shape around its base. Protective groundsheet designed specifically for the Vango F10 Helium UL 1 Tent. A durable 70D layer to help protect your tent floor from rough surfaces.Did you know that 1 person can produce up to 1 pint of condensation per night? So, let’s say you have 5 people in a tent, that is potentially 5 pints of water inside your tent! Other likely sources of moisture are wet shoes, clothes, dogs, cooking, even the air itself! Warm air can hold more moisture than cold air, as the temperature falls at night the more moisture is released into the air. Fact, even without occupants, the air in a six-man tent holds approximately 1 pint of water! This tent has factory taped seams, the flysheet has a silicone PU coating and the groundsheet is a bathtub style for complete protection from the wet weather and with its low profile design, preangled poles and Dyneema TBS® Pro this tent offers exceptional stability making it a fantastic choice for protection in inclement weather! Das extra große Sonnensegel, spendet Schatten und bietet bei schlechten Wetterbedingungen schutz vor Regen. Auch ideal um Schuhe o.Ä. vor dem Zelt stehen zu lassen ohne das diese in der Nacht feucht werden.

Ripstop Nylon 6 Groundsheet - 70 Denier Nylon Fabric is a great balance between low weight and high durability, waterproof to 6,000mm HH Flysheet: 20D nylon ripstop silicone PU, 3000mm HH / Inner: 20D nylon ripstop silicone/ 15D nylon mesh / Groundsheet: 30D nylon ripstop, 3000mm hydrostatic head / Poles: 2 trekking poles (not supplied) / Pegs: 9 x 15cm Y / Porches: x 2 , 28cm deep.Mini Line-Lok Abspannsystem - leicht im Gewicht und in der Handhabung, sehr stabil bei starkem Wind Services vary but generally best for parcels under 10 kg, cost & compensation varies by service used Since this F10 Helium UL 1 Tent was first released in 2017, it has been incredibly popular for those that want a highly technical tent that is extremely light weight (1.2kg) and compact (40x13cm) ideal for shorter trips and for those moments when you are able to grab your gear and go! Inflatable AirBeam® Structure - With 10 years’ experience in AirBeam® technology, we are the leaders in pole free pitching. AirBeam® technology ensures your awning is erect within a matter of minutes (supplied with AirBeam® pump) Ventilate your tent!: The most effective way to prevent condensation is to ventilate your tent and reduce the internal humidity of your tent by promoting a good airflow. Examine your tent for low and high venting options and open them to let the moist air flow out. If the weather conditions permit, leave the upper and lower sections of the door open, mesh sections can be kept fully zipped. If appropriate, also ensure vents at the rear of the tent are fully open. Make sure the vents are not obstructed by bags or sleeping bodies.