Wood is the traditional material used as a sledge hammer handle and my favorite choice. It’s very strong but soft and flexible which makes hard impacts easier on your hands. Sledge hammers and other farm tools have been made with wood handles for centuries and they’ve always been very effective and reliable. These are some of the most common types of specialty sledgehammers, but there are other variations and specialized types available. Each type of sledge hammer has its own design intended for a specific use. How To Safely Use A Sledgehammer Setting Forms: Sledgehammers are used for setting and building forms for poured concrete. A sledgehammer can be used to level and tamp the forms in preparation for pouring concrete or to help build new forms. Post mauls are similar to sledgehammers in shape, but are meant to drive wooden fence posts or tree stakes into the earth. Newer mauls have broad, flat circular faces that are significantly larger in diameter than the body of the head (where the handle attaches). Older post mauls are significantly larger than sledgehammers like their newer counterparts except the outside diameter (body) of older post maul designs remained the same large diameter as that of the faces of the hammer from one side to the other side. Sledgehammers usually have octagonal faces that are the same diameter or slightly smaller than the body of the head, and they are not nearly as large in overall diameter as a post maul. Our top recommendation for a steel-handled sledgehammer is the Wilton B.A.S.H 20-Pound Sledge Hammer, whose durable, rubber-coated steel handle minimizes vibrations while increasing control. Weight

Sledge Hammer 16lb | Toolstation Estwing Sledge Hammer 16lb | Toolstation

The handle can range from 50 centimetres (1ft 8in) to a full 1 metre (3ft 3in) long, depending on the mass of the head. [3] The head mass is usually 1 to 9 kilograms (2.2 to 19.8lb). Modern heavy duty sledgehammers come with 10-to-20-pound (4.5–9.1kg) heads. Sledgehammers usually require two hands and a swinging motion involving the entire torso, in contrast to smaller hammers used for driving in nails. The combination of a long swinging range, and heavy head, increases the force of the resulting impact. Overall, I prefer a wood handle for my sledgehammers rather than fiberglass. Summary: What Is A Sledgehammer Used For?Proper Grip & Stance: Always maintain a proper grip and stance when swinging a sledgehammer. The handle should be held with both hands, one hand should be near the head of the hammer and the other near the end. Your feet should be about shoulder width apart in an athletic stance, with one foot slightly forward. This stance will provide a solid base of support and help to balance your body when swinging the hammer.

Sledgehammers - Hammers - The Home Depot Sledgehammers - Hammers - The Home Depot

Before using a sledgehammer, you must be comfortable with the weight and feel of the tool. If the sledgehammer feels too heavy, or you feel out-of-control while using it, stop immediately. If you’re new to using a sledgehammer, follow these steps on how to swing your heavy-duty tool the right way. A sledghammer is a demolition tool featuring a very heavy metal head mounted to a long light weight shaft. It’s designed to be swung which produces a lot of force. Learning to use a sledgehammer safely is very important because they can cause significant injury to yourself or others. Setting Posts: Use a sledge hammer to bang in metal or wood posts deep into the ground. Then fasten your wire welded, wood or PVC fence panels to the posts. Both are prone to break near the head on a bad hit, and when that happens wood handles are easier and cheaper to replace.A sledgehammer is a standard tool used in construction work even if you’re not doing much demolition. Dead Blow Hammer: A dead blow hammer is a type of sledgehammer that’s designed to minimize rebound when striking a hard surface. This is achieved by using a hollow head that’s filled with lead shot. Dead blow hammers are often used in automotive and industrial settings. This section needs additional citations for verification. Please help improve this article by adding citations to reliable sourcesin this section. Unsourced material may be challenged and removed. pounds: Sledgehammer heads that are between eight and 12 pounds take on a more traditional sledgehammer look that includes a long handle and large head. These sledgehammers are useful for heavy-duty household projects like removing walls or breaking up concrete. Our top recommendation for a lightweight, traditional-sized sledgehammer is the Craftsman Eight-Pound Sledge Hammer. Splitting Maul: A splitting maul is a type of sledgehammer that’s specifically designed for splitting wood. It has a heavy head with a sharp edge on one side, which is used to split logs into firewood. It also has a pointed end on the other side, which can be used for driving stakes.