There is a digital display that lets you choose the Psi limit. After selecting the limit, switch it on and it will automatically shut off when your board is inflated.

It inflates up to 15 Psi which makes it perfect for SUPs. It inflates at a high pressure until your iSUP is as rigid as it can be. The Sevylor is the fastest electric air pump in the test and inflated my demo board in a little under 7 minutes.

Yak

Any experienced SUP paddler will tell you the same thing: once you've inflated it even a time or two with the manual pump, you're over it. It's the most exhausting part of the day! So unless you're really in it for the cardio and shoulder workout, it would be a big step up to consider an Electric Paddle Board Pump. The quality of materials that are used for SUP pump adaptors really depends on the buyer. If you want a higher-quality material, there will be an increase in price and vice versa. There is no right answer when it comes to this question because each person values different things differently. It’s just important to find something that suits your needs at the time. Ease of use Nixy sells a great landing mat that we use for our own SUPs, while a bigger tarp would do great for inflating more than 3 boards on one surface. Inflate to your PSI limit, don’t exceed it: The manufacturers of the electric pump usually assume the case that you come by car. Namely, most pumps are powered by the car battery or cigarette lighter.

Internal temperature sensor: Overheating can cause your pump to break. The Seamax SUP20D has a thermal sensor that turns the pump off if it’s running too hot.The ease with which you can use your SUP pump adaptor determines how suitable it is to the task. You don’t want awkward connections which require fitting and refitting just to get the pump working. You shouldn’t need any tools or help to make this work. Time taken to fill The OutdoorMaster electric air pump inflated my demo board in under 8 minutes. It also deflates in a minute or less.

Overheating is the major cause of SUP pumps breaking. The internal temperature sensor of the Seamax SUP20D prevents your pump from overheating and turns the pump off when it gets too hot. Another thing we like about portable power banks is that they can power a wide variety of devices. As long as there’s a USB port, you can use the same power bank that you use for your iSUP to charge your phone, laptop, camera and most other electronics without needing to search for an outlet. Most of the pumps reviewed here manage values of 15 to 20 psi, putting them right in the right pressure range for paddle boards. Electric pumps are either single-stage or two-stage models. The first blow air into the board until the desired pressure level is reached. The speed here depends on the strength of the pump.The time to fill the SUP with a SUP pump adaptor need not be long. It will vary depending on how much air is being pumped and the size of the SUP, but it can take anywhere from five minutes for smaller boards to up to thirty minutes or more for larger boards in rough seas. For most paddlers this range should suffice as an estimate. The Seamax SUP pump connects to a 12V cigarette lighter or car battery. The cigarette lighter connector comes with a built-in 12A fuse. What I Like Many people today are opting for inflatable boards because transporting them involves much less hassle. Electric pumps can reduce the stress of setting up and taking down even more. You can spend even more time on the water and use all your paddling power. Unique cooling system: Overheating is a common cause of pump failure. The Shark II’s active cooling system helps prevent this. Unfortunately, alternatives to the featured hand and electric pumps are few and far between. Classic compressors, on the other hand, are unsuitable for paddle boards. Typically, they fall into one of two categories: Too weak for the high PSI or too slow (45+ minutes per board) as reported by customers.