Only a microscopic level of protection is needed for the most part and if you need oil to prevent freezing of parts only use mineral oil. Napier gun oil isn't just limited to firearm protection; it also plays a pivotal role in scent training for dogs. However, if you’re looking for your first gun oil, or the one gun oil that absolutely every gun owner should have, this is it.

I can tell you that I now keep a small bottle of Mpro7 in my go-bag, but I still have some CLP in my cleaning kit. I use a solvent like kroil penetrating oil to break up foiling and after everything i s spotless I place some Super Lube on the metal on metal areas. Once doing this, you can use a degreaser spray on the trigger mechanism and then re-oil the appropriate areas.If you are shooting a lot and need some oil that is a bit better for performance/lubrication, get Mobil 1 or Militec-1. I just shot my 10/22 using 3 different dirty brands and I didn't start getting failure to ejects until after 1600 rds. However, there are non-toxic options like Breakthrough’s Military Grade Solvent or any FrogLube products, which work similarly to a lot of gun oils. Safe and effective, Napier gun oil is an often-employed aid in these sessions, allowing dogs to tap into their natural abilities while fostering a better understanding and trust between them and their handlers. Therefore, even though it works great for all sorts of firearms in harsh weather conditions, this one is a pass and there is no reason why you should choose it over the ones listed above.

You must ENSURE this is gun oil though and not motor oil, which is far too thick and will seize the internal mechanisms while softening the wood in the process. Many products are now available as two-in-one cleaners and lubricants, meaning the spray contains a solvent to remove plastic fouling and powder build-up. Even in high heat, your guns can stay lubricated for longer because Militec-1 has a super low evaporation rate. You’ll have to have a conversation about why you use motor oil with everyone who thinks they know better.Besides their synthetic components Mil-Comm's "magic ingredient" is teflon which bonds to the metal surfaces and provides lubrication even when dry.

The metal is prone to rust and wear, so it is important that you look after this, to help keep your gun looking and performing to a high standard. Airguns make use of a variety of different woods, including beech and hardwood, and although these are varnished at the manufacturing stage, over time the wood can show the effects of general wear and tear.Whether you are using a firearm for hunting or self-protection, there is the need to ensure you have the best gun oil for routine maintenance. Scent training for dogs is not only fun and engaging for your canine companions, but it also provides a unique bonding opportunity. We selected a mixture of oil, grease, and CLP options to test on various guns and knives to see what each brought to the party. Second, out of all the gun oils listed, this one has a considerably low temperature range out there. The kit I received for this came with cleaning oil and lubricating oil separately, along with some cleaning cloths to apply and wipe down the oil.