If you do not have iCUE-compatible lighting controller, you can set up third party ARGB lighting control if your motherboard or other controller supports ARGB lighting through a 5V header. Our iCUE software is the most powerful and complete method of controlling your power supply lighting.

As a last resort, you can use the hardware control button on the CX-F RGB PSU to cycle through 7 presets. The button will have “RGB” at its side. To cycle through lighting modes, press and hold the hardware control button for 3 seconds until the lighting mode changes. Electrolytic: 12x Teapo (1-3,000h @ 105°C, SC) , 2x Nippon Chemi-Con (1-5,000h @ 105°C, KZE) Polymer: 16x Teapo The fan spins at low speed with light loads, boosting efficiency by keeping its energy consumption low. 2% or 10W Load Test

There are no problems under high temperatures and full load conditions. You should not apply such harsh conditions for prolonged periods if you want to keep the PSU alive for long. 20-80W Load Tests Connect the other end of the iCUE RGB cable into a 4-pin iCUE lighting control port in a device such as the Lighting Node Core or a 6-port RGB fan LED hub. Nhấn nút ở mặt sau, kết nối với Bộ điều khiển ánh sáng RGB CORSAIR iCUE (bán riêng) hoặc sử dụng điều khiển ARGB tích hợp trên bo mạch chủ của bạn bằng cáp bộ điều hợp đi kèm. Kiểm soát ánh sáng của bạn theo cách bạn muốn.

If you don't care much about the RGB lighting, which is the main reason to spend more and buy the CX550F, you can also look at the Corsair CX550M and the XPG Pylon 550. Both use less advanced platforms than the CX550F yet still offer higher overall performance. If we had an RGB category in our best PSUs article for mid-level units, the CX550F could be included. Mỗi PSU CX-F RGB đều có quạt RGB 120mm chiếu sáng rực rỡ với tám đèn LED RGB có thể định địa chỉ riêng để mang lại ánh sáng nổi bật tuyệt đẹp cho bản dựng của bạn.The CORSAIR CX-F RGB series power supply unit is our first PSUs to have RGB lighting. It comes with three different RGB control options: