So, we can say that a belt handcuff is a handcuff that we make using a leather belt that we use regularly. When Do We Use a Belt Handcuff? Tie the two ends of the belt together, ensuring that the ratchet is on the inside of the knot. You can now adjust the tightness of the handcuffs by pulling on the ratchet lever. When you’re finished, replace the lever to keep the handcuffs secure. Method 3: Using a Latex Belt First, don’t do bondage with a person you don’t know well or trust, and agree on a safe word in advance. “A safe word — any word besides ‘no’ or ‘stop,’ basically — allows the bottom person to be in character if she likes; when it’s time to stop, the safe word takes them out of the fantasy scene and interjects real needs in a clear way,” Queen says. Make sure that the belt is not too tight. It should be snug but not so tight that it cuts off circulation or causes discomfort. Using other types of belts instead of leather ones can result in hurting the one who is handcuffed and can also do heavy damage to the belt. So, make sure that you have got the right belt before proceeding to the next step. Step 2 – Create the First Loop

To top it off, with a little bit of creativity, you can turn a regular old belt into a set of handcuffs that will do the job almost as well as the real thing.There are quite a few ways to make a belt handcuff using a leather belt. Among them, we have found that only two of them are easy and efficient. These methods are – Next, use your pliers to remove the prong from the end of the belt. The prong keeps the ratchet in place, so removing it will make it easier to work with the belt. Step 4: Cut The belt If you don’t have a belt, you can use a scarf, tie, or even a pair of pantyhose. Just be sure that whatever you use is strong enough to support your weight. And your belt handcuff will be ready. You can adjust the size and pressure by tightening or loosening the belt’s tail.

After you have determined the correct length, use a sharp knife or scissors to cut the belt at this point. Make sure that you cut through both layers of the belt so that you have two separate pieces. Step 3: Punch Holes The use of a belt handcuff is similar to regular handcuffs. In this case, we use belt handcuff because there aren’t any handcuffs around. This can be very helpful in situations where you need to detain someone for legal reasons.

When you are finished using the belt as a handcuff, carefully undo it to avoid hurting the person’s wrists.