Please note: These delivery times are approximate and are only to be used as a guide. Delivery times may be longer or shorter than what is displayed due to factors outside of our control. The flush valve in my toilet wasn’t making a proper seal so water from the cistern was constantly running into the pan...expensive if you’re on a meter like me. What is the outside diameter of the Valve seal rubber?, I am looking for replacements for an outside diameter of approx 61mm. Conceala 2 universal height, bottom inlet cistern - pneumatic single flush valve - no flushplate - 6 litre flush

Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed. Easy to fit once you find out how to access the seal in the type of flush mechanism you have without damaging the existing set up.The Ideal Standard SV01967 Dual Flush Valve Seal is a genuine Ideal Standard product, covered by a manufacturer's guarantee. The Ideal Standard dual flush valve seal and clip (SV01967) is a genuine, brand new Ideal Standard product, covered by a minimum 1 year Ideal Standard manufacturer's guarantee. The new seal is larger than the old one which will have worn away over time and use which is the cause for the leak that you now have and the reason for the replacement seal being necessary. This seal is a replacement for the worn seal in the toilet cistern which is allowing the water to run into the toilet between flushes. Apply downward pressure whilst turning valve, (to prevent clips breaking). Lifting the valve body exposes the valve seal.

If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods. This item was a perfect replacement for the worn seal on the flush valve. Changed in minutes and everything working fine with no leaks. Replacing this part is a much cheaper and easier option than replacing the complete valve. Fits multiple Ideal Standard & Armitage Shanks flush valves including SV89067 SV92667 SV92467 SV93467HINT: BE CAREFULwhen removing the flush valve from the basket as your flush valve may have gone a little brittle over time and we have known instances of the clips on the basket breaking off and it is then not useable. Fits multiple Ideal Standard, Armitage Shanks and Sottini flush valves including SV89067 SV92667 SV92467 SV93467 NOTE: Replacing the diaphragm may not always resolve your problem as the fault could be with the valve itself but it is a cheap way to try and resolve and is usually successful. We also recommend washing your valve in warm water to ensure any limescale or grit which could be causing an issue is eliminated. The new seal is larger than the old one which will have worn away over time and use which is the cause for the leak that you now have and the reason for the replacement seal being necessary. This seal is a replacement for the worn seal in the toilet cistern which is allowing the water to run into the toilet between flushes.

Cistern was leaking water into the pan constantly and was getting worse. New part fitted in less than 5 minutes, and all i needed was a flat head screwdriver to pop the old on out. Recommended. Cistern was leaking water into the pan constantly and was getting worse. New part fitted in less than 5 minutes, and all i needed was a flat head screwdriver to pop the old on out. Recommended.

Many make the mistake of purchasing a full replacement flush valve at the first sign of any issue, replacing just this washer may save you a lot time and money in the long-term. Over time as the flush valve is opened and closed, small imperfections tend to occur in the surface of the rubber washer causing the washer to be warped and not providing an adequate seal. Ideal Standard have only ever manufactured one type of seal and clip, so if you have a seal and clip like this, then this listing will be the replacement you require.

our operatives are all experienced within the industry and are more than happy to help with any questions.

Dead easy to replace, instantly stopped toilet constantly self flushing slightly, didnt even need any tools that's how easy it was to replace, saved me a small sum of money ( plumbers labour) watched you tube for self tutorial, job done in 2 minutes. Dead easy to replace, instantly stopped toilet constantly self flushing slightly, didnt even need any tools that's how easy it was to replace, saved me a small sum of money ( plumbers labour) watched you tube for self tutorial, job done in 2 minutes. If your Ideal Standard flush valve won't seal properly and is constantly passing water into the toilet pan but there is no sign of an inlet valve failure, it could very well be that the base sealing washer needs to be changed.