The Makita DHP458 cordless combi drill / driver is an extremely compact tool with an overall length of 225mm the shortest in its class with high power and productivity achieved with new DC motor (FD31-30). The DHP458 has enhanced dust and drip-proof performance to ensure reliable operation. With significantly more power, more drilling capabilities, increased robustness and added extras such as a depth stop and side handle, the DHP458Z is an all round winner if you're looking for the perfect combi to add to your collection. The Makita DHP458 replaces the BHP458 and is compatible with all Makita 18v slide-on li-ion batteries. The DHP458 cordless combi drill / driver is an extremely compact tool with an overall length of 225mm the shortest in its class with high power and productivity achieved with new DC motor (FD31-30). The DHP458 has enhanced dust and drip-proof performance to ensure reliable operation. The DHP458Z has significantly more power, more drilling capabilities, increased robustness and added extras such as a depth stop and side handle, making the DHP458Z an all round winner if you're looking for the perfect combi to add to your collection. MAKDHP458Z FEATURES It featuresa variable speed trigger for greater control along with a twin LED job light with pre-glow for use in low visibility applications. The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.

The Makita DHP458 LXT cordless combi drill is ideal for DIY use. With an extremely compact tool size with an overall length of 225mm (8-7/8"), allowing for easy access to screws in tight places. High power and productivity is achieved with new DC motor, Max. fastening torque of 91Nm and No load speed of 2,000rpm. eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions The Makita DHP458 cordless combi drill / driver is an extremely compact tool with an overall length of 225mm the shortest in its class with high power and productivity achieved with new DC motor (FD31-30). The DHP458 has enhanced dust and drip-proof performance to ensure reliable operation. DHP458Z vs DHP456Z Not all cordless drills are created equal and there are many different models even within one manufacturers range. It is important to know what you want to use the drill for before rushing out to get one.

Not Right? Try One Of These Instead

By pushing the trigger, the three-stage battery fuel gauge allows you to see how much battery power is still available. Three lights are on, using more than half the battery's capacity. 20% to 50% of the battery's capacity with 2 lights on. Less than 20% of the battery's capacity is used up by one light. Makita is a global brand of professional power tools and accessories, renowned for quality and performance. Whether it's a small and lightweight drill driver or a large, heavy duty and high power hammer drill, you can count on Makita to provide a drill that works. Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.

Makita DHP458RTJ 18v LXT Cordless Compact 2-Speed Combi Drill with 2x 5.0Ah Batteries & Charger in Makpac Type 3 Carry Case is it a serious improvement over the 458 with it being brushless and the power output being bumped up from 88 to 115nm, or it's more or less the same stuff just a tiny bit better? what other differences , pros&cons there are? Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 130Nm max. torque. Hammer Drilling mode rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter. the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production ToolBattery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life The Makita DHP485 18v LXT Brushless 2-Speed Combi Drill delivers outstanding performance without the bulkiness and weight of the typical cordless tool. The LXT Compact continues to refine the formula of faster-charging batteries with leading power-to-weight ratio's.(Batteries not included) All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come. High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

Toolden Limited (Company number SC453454). Registered office: 1 Esslemont Estate, Ellon, AB41 8NW. Credit subject to status and affordability. Terms & Conditions apply. Toolden Limited trading as Toolden is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 654671 ). We do not charge you for credit broking services. We will introduce you to Finance available from a number of our partner lenders. My gearbox for dhp458 is slowly going/acting up and I know the drill won't really last for long, but that's ok as I have used&abused that drill and used it as mixer almost every other day and it has given me a good service for 4years. If the tool is faulty within 30 days of buying it, we will arrange for its collection at no cost to you and supply a replacement.

David is a renewables and ventilation installer, with over 35 years experience, and is a long-standing contributor to Homebuilding and Renovating magazine. He is a member of the Gas Safe Register, has a Masters degree in Sustainable Architecture, and is an authority in sustainable building and energy efficiency, with extensive knowledge in building fabrics, heat recovery ventilation, renewables, and also conventional heating systems. He is also a speaker at the Homebuilding & Renovating Show. I'm slowly looking for replacement and would like to go brushless as my other makita tools are, however there's nothing really new from Makita range , only the DHP481z which is like 3years old and is their top of the line drill currently.