Disconnect any Wi-Fi extenders and wait for around 5 minutes to see if the thermostats return to being online again. If you are installing underfloor heating then you would install a wiring centre at each manifold. The wiring centre would provide the outputs for the boiler, pump and valve as well as the individual zone output. High/Low temperature Alert:When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert. This can measure the air and use the floor sensor to limit the max temperature of the floor to protect the floor surface. Changing your Program Mode, Temperature Format, Heating Levels settings will result in your stored profiles being deleted.

OpenTherm Smart Thermostat Kit | Heatmiser

neoApp is designed to work perfectly with the neoHub and Neo Thermostats. Together they present an advanced heating control solution that is perfect for modern lifestyles.For thermostats, Standby will maintain the Away Temperature you have set on each zone. On Timers, standby will turn the timer off completely.

NeoHub | App Control | Heating Controls | Underfloor NeoHub | App Control | Heating Controls | Underfloor

Ensure the neoHub is connected to your broadband router and not through any powerline or network switches Smart Profiles- Create a heating program and assign to one or more rooms. All rooms are updated automatically when any changes are made. Geo-Location FacilityYou decide what happens when you leave and return home (Configure on a room level) Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.Totally unstable connection from thermostats to receiver. Even with the boost in place. Stay away from this product. It will continuously disconnect and go offline. First add your neoStat and any accessories and then follow these steps to add your system to HomeKit neoHub is the gateway to the Neo System, providing remote control of all neoStats and neoPlugs from your iOS, Android and Windows 10 device.

Heatmiser Apple HomeKit Thermostat | Heatmiser

For anyone who wants to heat their home more efficiently, and likes the idea of being able to control heating and hot water from a smartphone, the Heatmiser Neo could be the advanced heating control system to meet your needs. Benefits of Heatmiser Neo The neoHub Gen 2 is the central hub and communication gateway for the Heatmiser Neo System, connecting the neoStat, neoAir, and neoPlug devices. With the neoHub Gen 2, you can control your heating and hot water system from your smartphone, making it an essential component of your setup. The neoHub connects to your home router by an ethernet cable, so one free port is required. The neoHub is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances.After you have paired your neoHub and neoStats, there are 5 things you should decide based on how you want to use the system. Apple HomeKit works on all your iOS devices, from iPhone and iPad to the 4th Generation Apple TV. Control of your home from just about anywhere is possible when you have a 4th Generation Apple TV and smart automation rules are possible, making your smart home even smarter! All our thermostats come with comprehensive operating and installation instructions and we are always on hand to discuss operational, technical and individual project requirements with you as necessary. What we are looking at is the 2.4GHz channel number of your router, it will be a number between 1 and 13.