Persons already sensitised to diisocyanates may develop allergic reactions when using this product. I used this to bridge gaps where a fence post was built into a dividing wall and the natural movement of the wood had loosened the plaster finish. The foam bonded and set well and was easily sawn to shape ready for painting with an old saw. This will be a more permanent solution than repairing plaster with plaster.

When buying partner items like this one, your contract of sale will be with our Range Plus Partner instead of us. building materials. Resistant to water, heat and ageing. Ideal for filling large holes, voids, gaps around window and door frames

By working with a variety of trusted Range Plus Partners, we’re able to offer our customers a wider selection of products. Yes, however it will need to be coated with a waterproof paint or stain prior to exposure. It is not recommended for use in continuous water exposure applications.

It features an easy to use syringe applicator keeps resin and hardener separate to avoid instant hardening, offering a smooth and clean application. Once dry the resin will set crystal clear for a spotless finish. H222 Extremely flammable aerosol.H229 Pressurised container: may burst if heated.H351 Suspected of causing cancer.H332 Harmful if inhaled.H373 May cause damage to organs through prolonged or repeated exposure.H319 Causes serious eye irritation.H335 May cause respiratory irritation.H315 Causes skin irritation.H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.H317 May cause an allergic skin reaction. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P362 + P364 Take off contaminated clothing and wash it before reuse.P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 o C/ 122 o F.P501 Dispose of contents/container to …This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter

PREPARATION: Clean and dry surface of dirt, dust and foreign material. Surface, filler & air temp should be above 40°F. Knead before use. SANDING: Allow to dry approx. 1 hr for shallow & 2-6 hours for deeper holes.* Use medium sandpaper.