These waterproof floating lights for playing in the hot tub with kids come in sets of 1, 2, 4, 8, or 12 so you can get however many you need or want. They are about the size of a tennis ball, but they have a flat bottom so they can sit on a flat surface when they are not floating in your hot tub. Once you have received your new inflatable hot tub, take a look at the hot tub brands' instructions to find out what maintenance it requires. Most hot tubs require regular cleaning. Before you can do anything else, you will need to first clean the tub itself and the filter. Then, you need to test the pH and alkalinity of the water. If your hot tub’s LED lights still don’t work after following the troubleshooting methods above, call an expert. A hot tub specialist is needed for blown fuses, relay issues, and defective switches. Visit your local supplier for hot tub service or troubleshooting. These lights are 100% solar so you never need to worry about replacing annoying batteries. Just make sure they are placed somewhere that they get at least 4-6 hours of direct sunlight and you'll be lighting up the night as soon as the sun goes down.

ULTRA-STRONG DURAPLUS & BEAM CONSTRUCTION: provides superb structural stability, cushioned comfort, protection from UV rays and durability for long lasting use SET UP IN MINUTES (TOOL FREE): Lay-Z-Spas require no professional installation or tools, inflate with the included pump in less than 5 minutes ready for filling with water Press the blue center button to turn on the light. Press again to change the lighting mode. To turn off press and hold the blue center button for 3 seconds.

Introducing the Lay‑Z‑Spa Hollywood AirJet™

Faulty Control System: A malfunctioning control system can prevent the LED lights from functioning properly. Usually, no. You can change the light without draining it by following safety precautions and accessing the light compartment. The automatic start/stop timer-controlled heating system saves energy and the industry leading ground detection system provides extra safety for you spa. LED light faults sometimes result from loose connections. Open the hot tub’s cabinet panels to access the hookups. The sort of hot tub you have will dictate which connections to examine. Removal of the cabinet panel where perimeter LED lights aren’t working reveals loose connections. Focus on the primary LED light and housing if none of them function. Step 3: Reconnect loose connections.

The Paris Airjet is extremely easy to set up and takes around 10 minutes to inflate. The electric pump does all the work and you don’t require any addition tools. The water fittings are tightened by hand, no spanners required. How Much Does The Paris AirJet Cost To Run?

FAQs

Dirty filters can damage LEDs; disconnect electricity or the hot tub. Turn off the tub and remove the filter(s) for 1-2 minutes. Restart the tub without the filters to see whether the lights flash. If the lights cease flashing, soak the filters in a solution or replace them if they’re old or broken. Step 6: Seek professional assistance. Lastly, every few weeks, you should completely drain out your hot tub and clean it with liquid soap and water. What to read next: Illuminate your spa sessions with the official Lay-Z-Spa Underwater LED Light. Compatible with all of our Lay-Z-Spa hot tubs from 2018 onwards, you can now add a splash of colour to your hot tub like never before. We love these solar pathway lights for a hot tub area because the unique pattern in the light creates a pretty pattern on your grass or walkway. This means that they are not just a light source, but also a decoration for your hot tub area as well. If your hot tub has a salt water system and the LED lights aren’t working, fix them. Access the control panel and choose Salt Water. Read the message and follow the steps to fix salt water system issues. Step 5: Remove and clean the filters.

Now that we have a basic understanding of the common issues, let’s delve into the troubleshooting process to identify and resolve these problems. If you find loose connections during the examination, secure them. Press the connectors gently to ensure adequate attachment. Remove and reinstall connectors without force. Some connectors contain alignment characteristics for a good fit. Be patient and secure all connections before continuing. Loose connections, power supply difficulties, control system issues, salt water system issues (for certain models), and filtration concerns are common hot tub LED light issues.In this blog, we’ll discuss the most common reasons for broken hot tub lights and provide helpful advice for fixing them. Hot tub LED light troubleshooting entails testing the power supply, examining and reconnecting loose connections, fixing salt water system difficulties (for certain models), removing and cleaning filters, and obtaining expert help. Exterior Thermally modified wood - also known as heat treated timber, is a beautiful, sustainable timber material produced using chemical-free heat treatment. You can choose the Colours of exterior thermo wood - please see the photos or send us a message.