Glue and self adhesive waterproof tape for repairing all types of outdoor clothing and footwear.Test compatibility on a small inconspicuous area before making a major repair. Stormsure is the main brand from Stormsure Ltd. Stormsure Flexible Repair Adhesive is the Flagship product and where Stormsure begin it's journey 20 years ago. Stormsure Flexible repair Adhesive is our very own formula which works differently to almost all other adhesives on the market today. It's polyurethane composition and moisture curing properties make it completely waterproof, extremely durable and very very strong making it the perfect solution for almost any repair! Stormsure's Inflatables Repair Kit is perfect to make an easy, durable and effective repair on damaged or burst inflatables. Inflatables can burst easily but don’t need to go in the bin. The Inflatables Repair Kit makes it simple and easy to complete a durable, effective and long-lasting repair on all inflatable items using either Stormsure Flexible Repair Adhesive, TUFF Tape patches or both. It may not look great once you have finished, as you will find you have covered half the boot with glue, but it will work. This adhesive is a single component moisture curing product. It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes. What is it used for?

A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc! Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Un tube d'adhésif de réparation flexible Stormsure est une partie essentielle d'un kit de réparation pour les randonneurs, bricoleurs, pêcheurs, cavaliers, chasseurs, plongeurs, campeurs, surfeurs, marins, ingénieurs etc ! Test for compatibility on a small inconspicuous area before making a major repair. Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).Stormsure Flexible Repair Adhesive can repair everything from a small pin hole to a large rip. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). Stormsure Flexible Repair Adhesive can repair everything from worn material to a large hole. Repairs are waterproof, flexible and resistant to abrasion (weather and water abrasion). The kit contains a 5g tube of Stormsure Flexible Repair Adhesive, a TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves. If you have an old pair of rubber boots where the leather or rubber is perished, or you have stepped on a nail or punctured your boot with a tool, Stormsure glue is the perfect solution. You can cover, renovate and seal the perished area, plug the hole or patch the tear with this excellent product.

DIRECTIONS: Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours. Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use. TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use. Cured clear adhesive may change to a pale yellow colour when exposed to bright light. Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, and window sills.

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills. Other Characteristics The Stormsure Car Soft Top Roof & Convertible Repair Kit offers a convenient and affordable way to repair your soft top/convertible roof. Cabriolet/convertible roofs can get worn down with time, by poor weather, or by being damaged by vandals. The kit contains a 5g tube of Stormsure Flexible Repair Adhesive ( Allow 24 hours for the adhesive to cure), a 15cm TUFF Tape strip, two 75mm (diameter) TUFF Tape patches, along with protective gloves. Q. I have a RUBBER WELLINGTON BOOT which has split on the upper where the boot flexes and creases when I walk. Will any of your products repair this bearing in mind every step taken creases the boot across the repair? Stormsure Flexible Repair Adhesive is a polyurethane-based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications. Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface. Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding. Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.