Thankfully, you can easily learn how to mount a TV on the wall without a stud finder, instead, using an anchor. There are Velcro mounts for attaching TVs to a wall bracket, although you will still need to secure the bracket to the wall with proper fixings. While many TV cabinets have cable management components built into their design, they don’t always give you enough slack or flexibility to raise the screen, which can complicate customizing your setup. Fits TVs with VESA (Bracket Mounting Holes Patterns) 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm and non VESA up to 400x400 mm.

Thankfully, they’re now a lot slicker than they used to be, which means you now have options with where to locate your TV. Before you immerse yourself in watching your favorite movies and shows, you’ll need to find the right place to mount the tv. If the wall appears flimsy, it may bend under the weight of the tv and there is a chance that it could potentially break at some point, wrecking both the wall and your television. The Kanto mobile mounts are a much safer solution that can also take up less space than furniture that could support TV screen mounts.Another drawback of using a TV stand is that your television will have a low viewing position, plus, there’s always the risk that pets or children may knock your TV over, causing damage and injuries.

Here is a helpful explainer video about no-stud mounts from Mount-It, the popular TV wall mount brand. Depending on the type of wall you have, no-stud wall mounts are designed for drywalls with no wall studs.If you aren’t handy with a tape measure or you don’t have access to a stud finder, we’ve got another option for you: features like trim nails, electrical outlets, and switches all indicate the location of a stud. But a proper wall mount would be better most of the time, or you will risk the screen falling off the wall. Instead of trying to decide which room gets the smartboard, with a mont like the Kanto MTM82PL, any room can have a smartboard.

It can support around 1 pound per 2 inches of tape, meaning you can hold up to 30 pounds of deadweight just by using the tape.While you could mount a TV without drilling holes in your wall in several ways, you should avoid most of them.

The rail is nailed through the holes using tiny nails that spread the load across the entire length. Using a dedicated TV wall mount should always be your first choice, and you can even learn how to hide the wires for a wall-mounted TV to make a sleek and professional look. bracket screws into the back of the TV; the other installs into the wall with tiny picture nails, requiring no studs, screws or anchors. Get it straight: Built-in bubble level means you'll get your installation jussssst right the first time. However, a proper TV wall mount would be advised in most cases, as adhesives will always be prone to failure.If the choice is mounting a tv with drywall anchors, check the load capacity for the selected anchors. Yes, you can mount a TV on the wall using a no-stud wall mount nailed to the drywall, brick clamps that fit between the bricks, double-sided tape or industrial-strength adhesive. Ceiling mounts will require drilling holes, but not in the wall, so I can get away with including it here!