Sand by hand along the grain of the wood for the smoothest results and wipe off the wood when completed. Step 3. Prime Add the wood primer. Be sure to match the primer with the filler, so if you use an oil-based primer, an oil-based filler is best. Also, if possible, remove the drawers, doors, and other hardware from your cabinet by unscrewing the hinges and screws that are holding it on. This solvent-free product comes in various colors to match real wood species. You can also stain or paint over it in virtually any color, as it's formulated to accept different types of paint just like solid wood, and it dries with smooth and even results. It comes in sizes up to 1 gallon, making it a good choice if you are facing a large project, as well. However, there may be certain situations in which either of the other products may produce better results.

However, the downside is that you may miss some spots in the grain because of the natural coloring.Besides money, there are still a few reasons where you may want to make and use a DIY homemade grain filler for oak wood. But it is not perfect as the end result is a hardened wood filler that may be difficult to properly sand. But there are advantages as well. All you need is a sanding sponge, putty knife, a damp rag, and a little elbow grease to remove the excesses of the product from the edges or other surfaces. You should do this by unscrewing all the screws that are holding the doors or drawers through hinges.

Now you can prime the surface once again (if needed) and start painting assuming the wood is dry and clean.Since fillers are between putties and paint in terms of consistency, they are fairly simple to apply when your ultimate goal is hiding wood grain before painting cabinets. For making your own grain filler product (often called cabinetmaker’s putty) you will need a small piece of wood that matches your project material. If you're looking for a reliable solution for exterior wood projects, we highly recommend using Bondo Wood Filler. Its two-part formula blends seamlessly to create a natural-looking medium-brown shade that can restore and reconstruct damaged or rotted wood. It's also versatile enough to be used to fill in missing pieces. After curing, which typically takes only 30 minutes, it forms a strong bond with the wood, creating a long-lasting and waterproof repair that won't warp or shrink. However, in many cases, the user isn't entirely sure where they will need to use the wood filler, so it may be more beneficial to opt for a light-colored, general-purpose wood filler that is resistant to water, dirt, and dust. This makes it possible to apply the wood filler almost anywhere and have it be suitable for the task. In addition, the light color means that it's easily paintable to match the wall, ceiling, or baseboard, or any other surface.

Personally, I don’t like the idea because it’s not an expensive product to buy. Why consider a DIY wood grain filler? Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. That’s why you might want to use a primer that has a color such as white to ensure that all areas are properly covered. 2- DryDexCollect the sawdust you have just made on a piece of cardboard or wood and remove all the larger particles This is due to the fact that you are adding some glue to it which will be of a different color (mostly light brown) from the wood you are working on. The product is a water-based, low-VOC, and low-odor filler, so you can work in the kitchen comfortably. It dries within an hour or so, after which you can apply another coat if needed, or go ahead to sand the cabinets lightly, apply primer, and then paint as desired. The Aqua Coat product itself is white, which makes it easier to see how effectively you're covering the wood grain, but it can be painted any color you choose once dry. It cleans up with soap and water once you're done.