If you have successfully eradicated mold from an area of your home, Rubino says it’s essential to deep clean the surrounding area to remove any particles released by the active growth. “If someone isn’t confident they can handle this, they should go ahead and call a professional,” he says. According to Rubino, there are four main ways to tell if you have mold or mildew: visible growth, water damage, odor, and chronic health issues. Mold tends to grow in warm, damp, dark corners of the home. By using a mould remover spray, you can simply spray the affected area and allow it to do its magic for the recommended time. Removing the need to scrub away at your mould due to their concentrated formulas. For deep routed mould and mildew, however, we would recommend adding a soaked cotton pad onto the affected area. Each of our mould and mildew cleaners are suitable for various areas in your home from silicone sealants grout, plaster to walls and much more. Visible growth can come in a variety of colors ranging from gray and blue to brown and green; shapes, and textures including fuzzy, powdery, or slimy,” he says. ”Water damage can look like coffee stains, warped or bulging ceilings and flooring, and discolored carpeting. For odor, pay attention to an earthy, musty, damp, cigar-like smell due to the release of gasses called microbial volatile organic compounds, and for chronic health issues, look for symptoms that come out of nowhere that seemingly have no underlying cause.” The 12 Best All-Purpose Cleaners of 2023 Questions You Might Ask How can you tell if you have mold or mildew?

Before choosing a mold remover, Rubino says it’s important to find one compatible with your affected surface. These include porous, non-porous, and semi-porous. According to Rubino, porous surfaces include fabrics and carpets, while non-porous surfaces include finished woods and sealed countertops. Finally, semi-porous refers to surfaces like leather and some types of plastic. If you’ve tried every method under the sun to get rid of mold and it still persists, it may be time to call in a professional. According to Rubino, it depends on the situation, but a general rule of thumb to follow is that anything larger than 10 square feet should automatically be handled by professionals. For porous surfaces, Rubino usually recommends discarding and replacing the item since the contamination can exist deep in the fibers. For non-porous surfaces, he recommends spraying the affected area and letting the product sit for a few minutes before wiping it away with a dry microfiber towel, letting the surface dry completely, and repeating the process two to three more times depending on the severity of the contamination. Homeowners can successfully get rid of mold, but it’s important to be aware of how to properly remediate the issue,” he says. “Successful decontamination means that the source that led to the issue is fixed, the microbial growth is removed including roots and dead particles, and all contamination is eliminated from the indoor space, including mycotoxins and bacteria.”The brand recommends using a mask, gloves, and protective eyewear when using it in either a ventilated or non-ventilated area. While mild cases of mold and mildew can be removed in a matter of seconds or minutes, more severe cases can take several applications over the course of a few hours.

Mould and mildew can cause havoc in your home. Whether you find it in your bathroom or other areas of your home, getting rid of mould or mildew can be difficult without the right product. At Robert Dyas, our extensive range of mould removers and cleaners will allow you to say goodbye to mould and mildew for good. Choose from a range of leading brands and products such as Cillit Bang, Dettol and more. Because of its natural and foaming spray formulation, this mold remover is safe to use on different surfaces and allows for a more direct and accurate application. For best results, spray the product on the affected area and let the foam work its magic for up to 10 minutes. Wipe off with a dry, clean cloth and repeat the process if necessary.