NETHERLANDS:SoundImports carries a wide line of DIY boards. We're excited to have them part of the miniDSP family. NOTE: The UMIK-1/2 are measurement microphones approved by Dirac Research. Knowing the major effect a wrong calibration/measurement would have on the final results of Dirac Live tuning, we strongly recommend that you select a UMIK-1/2 microphone together with your platform for a plug&play experience leading to best results. Any issues related to 3rd party microphones such as ASIO/USB audio driver incompatibility/Latency problems or incorrect calibration process will not be under our support structure by our support team. ITALY:VideoSell provides a wide range of audio solutions for the Hifi, HomeTheater market. A great partner for our Italian customers. Equalization – the DSP is used to alter the frequency response of the audio signal, to improve the listening experience

In addition to Dirac Live, the miniDSP SHD includes a full suite of our powerful but user-friendly DSP audio tuning software - ten-band parametric EQ per channel, crossovers up to 48 dB/octave, compressor/limiter, and a flexible 2x4 matrix mixer — for powerful audio system tuning in applications ranging from subwoofer integration to a two-way active speaker. Hardware Features With the miniDSP UMIK-1, you have an easy way to get started with acoustic measurement: to optimize and equalize your subwoofer, to correct for room effects, or even to design your own loudspeakers! In this application note, we'll show you how to get up and running with the UMIK-1.

The miniDSP SHD can be used with a Logitech® Harmony® remote. For this app note, we tried two of the most affordable Harmony remotes, the Harmony 650 and the Harmony 350. The Harmony 650 has a small screen and is easier to set up, while the Harmony 350 is a bit cheaper. This short app note shows you how easy it is to set up! Flex Eight with Dirac Live®:Full Range correction (20~20kHz) + IIR (10bands/outputs) /(Note: FIR and IIR filters on the input channels are not available to the end user if the Dirac Live upgrade is installed.) For multichannel system (E.g. 5.1/7.1) or a surround application where multiple speakers are spreadout around the room, use the 90deg file and point the UMIK-2 at the ceiling.

SWITZERLAND: As a company specializing in improving room acoustics, we are happy about the miniDSP products, which make our work more efficient. The Flex Eightis the latest member of the miniDSP Flex family of advanced audio processors. We’ve taken advantage of our flexible hardware The UMIK-2 is of course fully compatible with REW (Room EQ Wizard) and Dirac Live (version 3 and later). Driverless operation with macOS, Linux, Android and iOS, and a supplied ASIO driver for Windows ensure simple integration into many other measurement and recording applications. With the UMIK-2, miniDSP once agains stretch the limits of affordable acoustic measurement gear. Let the measurement fun begin! FeaturesCan I use the digital SPDIF output from Digital Out 1&2 into a DAC and use the built in analog Out3 for the sub at the same time? Among its own category which is a mix of DSP and AV receivers and processors it sets a new high bar:

The Streaming HD (SHD) series provides an All in One Audiophile experience at the center stage of your audio system. PC Setup: SoundblasterX G6 DAC -> JDS Labs Atom Headphone Amp -> Sennheiser HD560s & AKG K702 & Hifiman HE4XX & NAD HP50 & Sennheiser HD600 all EQ'd to Harman Curve. IEM: TRUTHEAR x Crinacle Zero. TAIWAN: DigiLog, based in Taiwan, is passionate about computer music, synthesizers, and audio signal processing equipment.

It is safe to say that the miniDSP UMIK-1 omni-directional USB microphone has become the non-plus-ultra for affordable yet highly accurate acoustic measurement. The USB-calibrated UMIK-1 provides low noise while being easy to use. Thanks to the USB interface and the unique calibration files provided with it, you will be ready to conduct your first measurement and make recordings within a few easy steps. In this application note, we will show you how to design an active 2-way loudspeaker with the miniDSP 2x4 HD/Flex. Using the 2x4 HD/Flex, you can either create a conventional (Linkwitz-Riley or Butterworth) crossover, or a linear phase crossover.