This same issue could also be interfering with your case lid when closing, if you are having a hard time closing the lid correctly, this is an indicator that buds are not set correctly or the gels are interfering. Minutes of charge for the ear buds will provide 2+ hours of playtime, and 10 minutes of charge in the charging case will provide 4+ hours of playtime. Alternatively, you can manually enable pairing mode by touching and holding the touch area on both earbuds for four seconds . Do this while the earbuds are turned on. How to Reset the Indy Evo Buds? When searching for misplaced headphones, use the Tile app to audibly locate them. In the Tile app, tap “find” and listen for your headphones playing the Tile tune.

When you pair your headset a second time or to a subsequent device put the headset units into both ears. Hold your fingers to the touch sensors on both the left and right units for 6 seconds. Answer: Various reasons could prevent the earbuds from pairing together, but there are a few solutions that will solve this problem . INDY™ EVO has stereo (both bud) calling and streaming so you’ll always hear the caller or your content in both ears. The earbuds will automatically connect to the last device they were connected to , provided that the device is within the Bluetooth range and has its Bluetooth activated. Note: This product has Rapid Charge. This means that you can charge your earbuds in the case for 10 minutes to get 1.2 hours play time.If you are having problems or need to pair a second or subsequent device, put the earbuds into both ears, then hold your fingers to the sensors on both the left and right units at the same time for 6 seconds to enter pairing mode. Resetting your earbuds to resolve pairing issues While the earbuds are OFF, press and hold the touch areas on both buds for 10 seconds to reset them.

This allows both the LEFT and RIGHT bud to work alone, which allows more media controls and features to be activated from either side, and the microphone to work on either side. Functions such as, play/pause, answer call/hang up call, Activate Assistant, switching between EQ modes, and Ambient Mode can be controlled on both the LEFT and RIGHT bud, simplifying the user experience. The earphones are relatively comfortable, for the most part – but you do get a bit of fatigue after a lengthy listening session. There’s also no ANC here, but the snugness of the in-ear fit does mean that you get more isolation from the outside world. Skullcandy Indy Evo review: Features Then, place the earbud you are not using in the case . Audio will only be coming out of the earbud that remains in your ear. The solo mode is a feature that allows you to use only one earbud while the other remains powered off and in the charging case.

As mentioned above, the IP55 rating means that your earphones are dust, and sweat resistant. However, we wouldn’t recommend immersing these earphones in water. Remove them from the case to automatically power them on . The earbuds will start flashing blue as a sign that they are pairing with each other before they can be available for pairing to the source device.

Accept the pairing prompt, and you will have successfully connected the buds to your iPhone or iPad. Also, note that leaving them in pairing mode for extended periods will also turn them off, and you can manually power them on or place them in the case and then take them out to power them on. Once successfully paired, a voice prompt will notify you are now “Connected” and you will see INDY™ EVO twice in your “paired devices” list. When setting up my Indy Evo earbuds, I realized it could be complicated, especially if you do not have the user guide . Therefore, I compiled all the information you need to adequately pair them to any source device and truly experience the buds. However, the features that the Indy Evo earphones do have are decent enough. For instance, you get a total of 30 hours of battery life with a rapid charge function when you’re in a hurry.Each earbud is made from plastic, with a dangling stem and the Skullcandy logo on the outside with an LED light one each one. The matching charging case keeps things just as simple, with a matte design and the logo on the outside, with four LED lights indicating battery life. Find the Skullcandy earbuds in your Bluetooth menu and pair them to your device. The earbuds will say “ Connected” when the pairing is complete. Next, place the earbuds in their charging case and ensure they show they are charging by the LEDs glowing red . Yes! INDY™ EVO is sweat, water, and dust resistant (IP55), and the additional stability gel feature improves fit, comfort, and is great during exercise. In such situations, you can force the pairing mode (manually) by going to the device’s Bluetooth settings and disconnecting the earbuds or turning off Bluetooth on the source device.