Both of these situations require the use of a Wedge Kit to properly angle your Ring Video Doorbell 4 to catch the motions your want while avoiding the motions you don't. This article will briefly explain how your Ring Video Doorbell 4 sees the world and how to use your Wedge Kit. The solution in this case is to once again use a Wedge Kit to lower the angle of your Ring Video Doorbell. The Ring Video Doorbell has two versions, 1st and 2nd Generation. The mounting process is essentially the same for both but the mounting plate configuration is different.

If you have another kind of doorbell, you'll need a wedge or corner mount that is specifically designed for that doorbell. The installation process of the wedge kit and corner mount is essentially the same for all Ring doorbells. Finding the correct Wedge Kit for your doorbell If your door is above ground level with stairs leading up to it, this can cause your Ring Video Doorbell to miss visitors walking up your stairs and cause you to get motion alerts from passing traffic. If you mount your Ring Video Doorbell 4 on cladding, a Wedge Kit will properly angle your Video Doorbell.To install a corner mount, screw it into your wall through the two holes in the middle. Then mount your Ring Video Doorbell 2. The Wedge Kit is an optional accessory used to angle your Ring Video Doorbell 2 down five degrees. If you installed your Ring Video Doorbell 2 higher than the optimal installation height of four feet off the ground, the Wedge Kit can improve your view. It can also reduce motion events from passing traffic and ensure you capture approaching visitors if your Ring Video Doorbell 2 is up a staircase, installed on angled siding, or facing a busy street. To install a Corner Kit, simply screw it into your wall through the two holes in the middle. Afterwards, mount your Ring Video Doorbell 2 to the mount.

Installing your Ring Video Doorbell is a simple process. Below video will give you a step-by-step guide. A wedge kit is an optional accessory used to angle your Ring Video Doorbell 2 down five degrees. If you installed your Ring Video Doorbell 2 higher than the optimal installation height of four feet off the ground, the wedge kit can improve your view. It can also reduce motion events from passing traffic and ensure you capture approaching visitors if your Ring Video Doorbell 2 is up a staircase, installed on angled siding, or facing a busy street.The Corner Kit is an optional accessory used to angle your Ring Video Doorbell 2 15 degrees left or right away from the wall. If you installed your Ring Video Doorbell 2 on a corner or adjacent wall, the corner mount can improve motion detection and view. How to install a Corner Kit Ring Video Doorbell 3 and Ring Video Doorbell 3 Plus Wedge Kit Corner Kits for different Ring Doorbells Second, through a network of "PIR" or passive infrared sensors that your Ring Video Doorbell uses for motion detection. In the illustration below you can see that the motion sensors have a much more focused field-of-view than the camera and that this view is pointed downward to catch motion (as much as possible) within 1.5 to 5 metres of your Video Doorbell and exclude motion sources outside that range.