Also, keep in mind that this is an entire hidden fastener system, so the price point will be higher. We aim to supply the best products possible. Please be aware of other outlets selling 'Sub-Standard' Balau! Maybe the spacing isn’t quite right, or maybe you don’t want to deal with the creaking so you want a replacement.

Trend PH/JIG Pocket Hole Jig - Machine Mart - Machine Mart Trend PH/JIG Pocket Hole Jig - Machine Mart - Machine Mart

These boards come finished with two different profiles, giving you the ultimate flexibility and allowing you to get creative with your outdoor space. During the winter, when the humidity is significantly lower, the wood will dry out and reduce in size. You might have noticed this quality if you live in an older home that has solid wood doors. A door that might work just fine in the winter may in the summer swell and not close properly in its door frame. Where your measurement falls on the boundary of two sizes, we recommend selecting the larger of the two sizes for a comfortable fit. You’ll also want to take into account the type and intervals of your fasteners. Fasteners are what hold boards in place, resisting their efforts to bend and move as the humidity changes. Please note: Should you need any additional screws, please use the Kreg 2" screws as these are made specifically for this system. These can be found at the bottom of this product in related items.But the scenario is different in long term. Camo jigs are harder to replace and unfortunately, they start creaking pretty early. So if you want something long-term-friendly, go for the Kreg one. Timber is a natural product and is subject to continual movement when exposed to atmospheric conditions. This may be evident with splits, shakes, knots or warping. These are not considered to be a fault or defect. Please allow a small percentage for waste. To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand. The jig itself has an easy-grip handle that gives you a secure hold and complete control over each and every joint.

Deck Jig System - Concealed Fastening System

If you can acclimate your wood, cover it and make sure it is not sitting directly on the ground, so it doesn’t soak up rain or groundwater. A 1/8” gap can easily be accomplished through the use of an 8d nail. Lay the boards in place, using several 8d nails as spacers. While pushing the board flush against the spacers, secure the board into place with your choice of fastener. Once installed, treated wood will dry out for a few months, which will cause it to shrink. With this in mind, wet wood should be installed butted together as a gap will be created as the wood dries and shrinks.

Don’t despair! There is a solution here. You’re not the first one to make this mistake and you certainly won’t be the last. The folks at Lounsbury Products LLC know this, and they’ve designed The Saw Guide to help you. Kreg is easier to unscrew and redo. Camo on the other hand needs more work and isn’t always smooth with reversing. Conversely, dry cedar boards should be spaced 1/4″ apart to avoid damage when the material absorbs moisture and expands, narrowing that gap. Leave a 1/8″ space between butted ends as cedar will also expand lengthwise. And the best part is, this tool won’t cost you much more than lunch at your favorite fast food joint.