Chain lubes are typically offered in a variety of formulations for specific riding conditions. “Wet” lubes (such as Park Tool CL-1 Synthetic Blend Chain Lube) have a high viscosity and perform well in humid or rainy climates, while “dry” lubes generally attract less dirt and debris, which is especially helpful in dry, dusty climates. Chains can also be lubricated with a wax-based lubricant. To learn more about the merits of these different options, visit a cycling message board or buy your local mechanic a beer. For the ratchet found on DT Swiss, Enve hub or the campy pawl system, would using the same grease be ideal? or #2 will be more ideal? Anti-seize is ideal for surface preparation on threaded and press fit applications, especially between two dissimilar materials. It provides a durable, long-lasting layer of protection that guards against moisture and corrosion more effectively than grease. Any threaded or press fit application where you can use grease, you can use anti-seize compound. Grease is simply oil suspended in a mixture of surfactant, soap, or other compounds to keep the oil in place, resulting in more durable, long-lasting lubrication. Common all-purpose grease (such as Park Tool PPL-1 PolyLube™) can be used for a wide variety of applications on a bicycle, although other options may be preferable in certain situations as we will cover below. Grease should be changed when it becomes contaminated with grit and dirt or when the oil in the grease becomes old and dry, which reduces its lubricating properties. When inserting one tube into another, such as when installing a seat post or a quill stem, it is a good idea to apply grease. This will prevent seizing and corrosion, and ease future removal of these components. Apply the grease to the inside of the seat tube or steering column rather than the outside of the seat post or quill stem — this will keep the grease inside the tube, rather than spurting out when the tube is inserted. Carbon fiber seat posts are an exception — see Assembly Compound below. Clamping

Shimano Special grease Dura Ace - Weight Weenies Shimano Special grease Dura Ace - Weight Weenies

The internet is flooded with information on different types of bikes along with detailed information regarding its parts and how they function. Do spend some time gaining knowledge about bike parts so that you understand the difference between different models, brands and frame materials etc. must say how useful I have found some of your videos on youtube. Your engineering analysis and scrutiny is first class. Keep it up. Only valid for active forum users. Active means at least 30 postings within the last 30 days (no spam postings). Hi, Watched the video, very interesting. I was looking for a small quantity of NLGI 0 grease for the bearings etc and was wondering if this would be appropriate? https://www.lubefinder.com/shell-gadus-s2-v220-0.html For someone who is keen to go fast, an NLGI 00 or 000 grease would be recommended for bearing lubrication.Although it may be convenient, and it may work temporarily in a pinch, common household penetrating oil such as WD-40 is not an ideal chain lubricant. Do not regularly rely on penetrating oil for chain lubrication. Typically, grease is used for either lubricating moving parts or as an assembly aid. The types of grease for these two applications are quite different. Wiggle Ltd (In Administration). 1000 Lakeside, Suite 310, Third Floor N E Wing, Portsmouth, Hampshire, PO6 3EN, United Kingdom Although not recommended for press-fit or threaded applications, assembly compound is very useful on clamping applications, especially involving carbon fiber. A common application is on carbon fiber seat tubes that have difficulty holding the seat post secure. It can also be useful on the interface between handlebars and stems.

Shimano Premium Grease Review - My Bike Reviews Shimano Premium Grease Review - My Bike Reviews

Taking NTN LLB bearings as the example, then how much difference do you estimate it would make to rolling resistance (maybe best expressed in Watts) in a typical bike wheel bearings set up (say 6 small bearings in total, like 6802s, across the 2 wheels including the freewheel) using 2AS (Shell/Alvania Grease S2) compared to 5K (Kyodo Yushi/Multemp SRL) grease ? A second opinion is always better and for this you can simply visit the local bike shop near you and you can get advice on the type of bike you can buy and the different models you can choose from that suit your needs. Consider the fit first is provided subject to affordability, age and status. Minimum spend applies. Not all products offered by the panelTake a look now to discover what makes Shimano Premium Grease worthy of a review score of 9.4 out of 10. I mostly ride in summer, dry condition to the end of fall with wet surface, but never while it’s raining; and service interval has higher priority than performance, would NLGI 1, like Gadus S3 and S2 V220 give me a good performance while only need to service the bearing every 8~12 month? or the Mobile 007 should be able to last? Anti-seize compounds such as Park Tool ASC-1 are typically made of ground metals such as aluminum or copper suspended in a lubricant. Chain reaction Cycles and CRC are trading names of Wiggle Ltd (In Administration) registered in the United Kingdom at 1000 Lakeside, Suite 310, Third Floor N E Wing, Portsmouth, Hampshire, PO6 3EN,

Shimano grease - Singletrack World Magazine September 30, 2019 Shimano grease - Singletrack World Magazine September 30, 2019

If you find an item at a lower price with another commercial internet retailer, you will receive it from us at the same price, provided the conditions listed in the link are met. A high load grease that keeps corrosionat bay, and avoids damage to the bearing, is by far superior in the long haul.The NLGI rating will effectively control the materials that are used. For example, copper grease is rarely found in low NLGI numbers because it contains copper as an abrasive and is unsuitable for moving parts, this is often why it is called anti-seize compound. In contrast, lithium and teflon are found at the more dynamic end of the scale owing to reduced friction. Carbon Grease / Fiber Paste Shimano Premium GreasePremium Grease is the same specification used as standard in the best quality Shimano bearings Features: Specifically formulated to keep Dura-Ace components running smoothly and increase their life Keeps parts rust and corrosion free Acts as a barrier to prevent water from reaching bearings A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products) Buy Shimano Greasefrom Chain Reaction Cycles, the Worldäó»s Largest Online Bike Store.