When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. The size of push fit waste fittings is based on the nominal inside bore of the pipe they are used with. This cannot be used directly onto 56mm waste pipe but must be inserted into a 56mm solvent weld fitting such as a coupling or an elbow. The reducer is ideal for connecting a larger 50mm waste pipe system to 32mm waste pipes where the system branches into smaller courses. Brett Martin 50mm waste pipe fittings are compatible with all leading manufacturer ranges of 50mm solvend-weld waste systems and are kitemarked to BS EN 1566.

In addition if the term "ABS" is printed on the pipe this identifies the pipe as solvent weld waste pipe.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Traditional aluminium doors struggle to meet current legislation, forcing you to choose aluminium aesthetics and finish over thermal performance. The joint can be taken apart again if required, but always check that the O ring has not been dislodged from its housing groove in the fitting as this will cause the joint to leak. The product is manufactured using durable ABS, long-life and yet lightweight for ease of installation.

Deliveries can take place from as earlier as 07:30 right up to 18:00 depending on the courier/haulier and considering local traffic etc. IMPORTANT NOTE: Solvent Weld Waste Pipe fitting sizes are often stated in metric standard measurements, however the actual pipe size is measured in imperial. The system is manufactured in maintenance free powder coated aluminium in white as standard with any RAL no. The Polypipe Push Fit range offers a selection of 50mm, 40mm and 32mm waste pipe and fittings for many requirements.The canopy is glazed with 16mm triple wall UV stabilised polycarbonate sheeting offering greater flexibility in canopy design with enhanced strength and rigidity, available in clear, bronze or opal tints. Years Guaranteed 10 Type Reducer Thread Size 1 1/4 inch Suitable for Plastic waste pipes, copper pipe and lead pipe Material Polypropylene Diameter 50.

The extensive range of products now include traps, WC connectors, shower and floor gullies, air admittance valves, roof flashings and waste outlet fittings. Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). Sometimes goods can be delivered in multiple deliveries, this is due to some items coming direct from suppliers or our own yard. The eaves beam cleverly double’s as an integral box gutter utilising the support posts as down pipes with the rain water exiting through the variable height post feet.Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). solvent weld waste fittings are to be used with solvent weld waste pipe with an actual external diameter of 36mm. The Brett Martin Solvent Weld Waste Pipe Reducer is manufactured using PVC-C (chlorinated polyvinyl chloride) as a 50mm x 32mm component. The three options are as follows - 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. Please be aware that on occasion fittings may vary from the colour and design in the image above, regardless of this, they will be of the same size, and will be WRAS approved.