Avoiding costly visits to a dealership when you can diagnose, report and clear troublesome fault codes within minutes. The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is turned. supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian. Diag tools, even the likes of Star/Xentry are just gateways to access the diagnostic services that are predefined in each module. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting.

The advantage of the MBII is that it's mostly unidirectional meaning that it won't mess up your ECU if you do something stupid. You no longer need to go to the dealer to reset the Air Bag light, scan the ABS System or perform dealer exclusive diagnostics.Our range of iCarsoft products is extensive, catering for the most popular car manufacturers, budgets and needs.

Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.With the iCarsoft 4th Generation Diagnostic Tool you will be able to easily see DPF Fill Soot Levels and on supported models, carry out a forced Diesel Particulate Filter (DPF) Regeneration. Trans adaption (TCM)| Function supportsroutine maintenance of transmission modules, for example reset adaptation values andadjust the oil level. I don't know if the particular vendor's product I posted supports what you need, but you can contact them (there is a "contact us" button at the left side.

You need to drive fo half an hour at low speed with high revs and probably some extra brake load as well. Seems Ze Germans are quite aware of what M-B hobbyists are doing and don't like it, which is unfortunate.Professional YouTuber with time to edit videos including fancy intros and background music I am not! I can assure you that Icarsoft MB11 will do a forced regen, so I would assume that the MB3 is better again. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

A hand-held diagnostic tool, offering FULL SYSTEM Diagnostic coverage including Engine, Transmission, ABS, Airbag, Air Suspension and so so much more. where supported - certain Service Functionsmay not be supported due to requiring Special Main Dealer access or protected by Manufacturer Copyright. OBDII Function for all OBDII cars, not only for Mercedes, Maybach and Smart Read Codes| Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes. I see that there are several versions of C3, and each vendor claims theirs is the best, the others' are rubbish . While the MBII only gives you about 90% access to most of the systems in the Benz, a majority of the communication going on is unidirectional.

Select the 'Diagnostics' functions list to see if this scanner can read and clear fault codes on your vehicle. Then I bought a new Sprinter and was told the CR V3 was needed for the W907s -- model year 2019+ here. The early models of the iCarsoft scanners such as the i910 for BMW, i930 LandRover /Jaguar and i980 for Mercedes-Benz have been around for a while and many of you loved these scanners. Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate.