These items normally require Identification (Passport) or a Firearms / Shotgun Certificate before they are handed over. Shotguns, Rifles, Airguns and Moderators are usually good examples. When purchasing a 'collection only' item you are in effect paying a deposit for your goods. In all instances you can choose to collect your item from one of our stores (Exeter, Dorset or Newport) or from a 3rd party gun dealer. The latter may be at an additional cost to yourself. ZOOM — allows you to choose different types of zoom (Standard, Extended). Extended Zoom will give an electronic zoom of 10x your optical Zoom. Example: 3-14 in Extended mode becomes 3-30x. However, we would like to caution you that you will begin to see considerable pixelation at such a zoom. Interface elements will appear as widgets that will provide access to useful information. There are several types of widgets: Ballistic Calculator - Hunt responsibly by making sure your shot hits the target Each and Every time. Range, Wind, Multiple-Weapon Profile, Angle to target, Temperature, Humidity, Plus more. Helps you determine exact ballistics for expert long-range shots

For best results you should only Calibrate RAV at a shooting range. ATN endorses safe and responsible recreational shooting, and does not recommend RAV calibration at home regardless of state law. The Ballistic Calculator will make your adjustments for you, but only after you have entered the distance to your target.

Shoutbox

After calibrating the device please remember that the compass will work best when holding the X-Sight parallel to the ground.

Get in tune with the environment to ensure you make that shot. For example: Relative Humidity 85% Wind Speed 12 mph Wind Direction -45° Temperature 59°F Barometric Pressure 29.92 hg Altitude 1800 ftPress and hold the Home Button and Top Arrow Button closest to the Directional Roller for 2 seconds, this will pair the X-TRAC to your scope. Although you may not need more then one shot to Zero in your scope, we do recommend that you repeat the process several times to make sure that you truly are Zeroed in. As you gain experience in Zeroing in your scope it should take you no time at all to Zero it. Take two easy readings of your target and the scope will not only range in on your prey but adjust your reticle’s Point of Impact instantaneously.

All files will be stored on the microSD card. Recorded videos can be found in the Gallery on your device. In 2018, ATN proudly introduced its 4th Generation line of products in both Day/Night Digital systems, as well as their new Thermal product line. The new lines boasts, the new Obsidian 4 core with Dual Processor, much-improved image processing capabilities and lightning-fast performance. The new Ultra HD Sensor and Dual Core Processor technology offers the processing power that will deliver a picture quality that is unmatched, with no loss of resolution up to 10X magnification. New speeds allow us to simultaneous video record in full 1080 HD while streaming to your Obsidian App. Our state-of-the-art internal battery provides ultra-low power consumption and offers around 20+ hours of use on most models, taking away the worry of power management! Next you’ll need the rangefinder in hand to press the power button on it. Press the power button on the rangefinder twice. This will sync the two devices. You’ll then see “Paired” to the right of “Rangefinder” in the menu. Now you can exit the menus and return to the home screen. There are two options for Light Sensitivity; Low or High. On the Low setting, you will get 30 fps. On the High setting, you will get 15 fps. Your selection will depend on the amount of ambient light needed for optimal performance. Photo/Video There are two ways you can use the ATN Smart Mil Dot reticle. You can use it as a standalone Mil Dot reticle or you can have the ATN Ballistic Calculator assist you in its use.

By following this process, you should be able to use RAV with the ammunition and platform used during the calibration process. Before operating your device, update the firmware to the latest version. All firmware updates can be found on at https://www.atncorp.com/firmware. Now depending on your load, you can program the variance between hash marks in Mils into this Smart Mil Dot Reticle. 1 mil = 10cm @ 100m Remember that turning on Night Mode during daylight will not harm your device; however, you may not be able to see anything due to the image being too bright.

Remote Controller Orientation — Allows you to choose the orientation of the remote, changing the direction of the scroll wheel. Wind strengths and direction are by far the most important of the group, especially during medium to heavy winds. We highly recommend that if you plan to shoot at ranges over 300 yards. Take wind readings and enter the information into your sight. Both wind speed and wind direction are needed if you plan to make accurate shots. You can enter the information through the Environment shortcut or your mobile device using the Obsidian App with a WiFi connection to your scope, whichever you find easier. When a shot is fired and your scope experiences recoil (some airguns may not provide enough recoil for RAV to be activated). The scope will record video prior to the shot being taken, the moment of, and some time after. Exact settings may be adjusted in the System Settings. Recoil Activated Video Now take your ATN BinoX 4K/4T and Short Press the power button. You should see the Rangefinding reticule appear. Once the BinoX 4K/4T ranges the target, the range data will automatically be transfered to your ATN Smart HD scope. If you have the Ballistic Calculator turned on and the Ballistic profile has been setup, your POA will change based on the reading the ATN Smart HD scope receives from the ATN BinoX 4K/4T.After activating the RAV function in the Shortcut Carousel, return to the Homescreen. Continue the activation process by pressing the RIGHT button that activates Video. This scope offers magnification, night & day vision settings, and records video. Yes, you read that right. The X-Sight allows you to record your hunt so you can share the amazingness of your kill with friends and family. To enter the System Settings, open the Shortcut Carousel by pressing the OK button and selecting the wrench icon with RIGHT or LEFT buttons . When choosing to use this option, the incorporation of your widgets are absent. Widgets would include reticle, time stamp, and logo that are added during video processing.