As a minimum, this should always include suitable goggles or glasses, an appropriate dust mask for the material being cut, and good quality work gloves Dortech Direct Ltd is a leading supplier of glass cutting tools for a wide range of applications. They offer a variety of high-quality glass cutting tools, including diamond glass cutters, to meet the needs of both professional and DIY glass cutters. They will generally extend anywhere from 10-30mm out beyond the open cutting end of the hole saw, and may also incorporate an ejector spring mechanism for helping to jettison plugs of loose material build-up Cordless models can get the job done on thinner or softer materials, but you’ll require at least a 14V model

Regardless of the material or surface you’re working on, never try to force the drill bit through any faster than it wants to go In addition to these basic glass cutting tools, Dortech Direct Ltd also offers specialized glass cutting tools, such as circle cutters, glass scoring tools, and glass pliers. These tools are designed to provide specific cutting solutions for unique cutting applications and can be used in conjunction with other glass cutting tools to create precise and efficient cutting solutions. Ensure you cut directly down into the workpiece at an accurate perpendicular (90-degree) angle to the surface This is due to the width of the hole cutter bit, and the subsequently large amount of material being removed You should never attempt to bore holes through masonry or heavier timber (anything over about 50mm) with a battery-operated drillAnother popular glass cutting tool offered by Dortech Direct Ltd is the manual glass cutter. This tool is designed for simple, manual cutting of glass, and is ideal for smaller cutting jobs or for use in areas where electricity is not available. The manual glass cutter features a cutting wheel that is advanced along the surface of the glass to make a score line. The glass is then snapped along the score line to create a clean, precise cut. One of the most popular glass cutting tools available at Dortech Direct Ltd is the diamond glass cutter. This tool features a carbide or diamond-tipped cutting wheel that is ideal for cutting both tempered and non-tempered glass. Diamond glass cutters are known for their precision and durability, making them a popular choice for professional glass cutters. They are also easy to use, even for those with limited experience, and are suitable for a wide range of cutting applications. Be aware that going in at a slightly off-centre angle - or hitting a nail while drilling - can cause very sudden and violent binding/jamming of the drill when using a hole saw If you want to drill a hole clean through a workpiece, be aware that going directly from one side through to the other with a hole saw can create a lot of ‘blowout’ (material tearing) on the reverse side