Our custom cutting services ensure you get the size you need at the highest quality. With ongoing investment into our plant and machinery combined with regular maintenance and calibration, we aim for consistency and exceptional results. We offer a range of services using the right equipment and skilled metal workers. In the unlikely event that we have sent you an incorrect product, as soon as we have been notified, we will arrange a swift collection and organise for the right one to be delivered straight-away.

Radial All Terrain Vehicle Tyresare usually found on more modern machines and machines that run larger tyres. Radial ATV tyres offer certain benefits over their crossply counterparts. As a radial tyre is made up of two main sections (tread & sidewall) It allows the tyre to have characteristics that make it suitable for a wide variety of applications. This measures the size of the tyres in inches. The first number denotes the overall diamter of the tyre which in the example above is 25". The middle number is the overall width of the tyre which is 8" in the example above. The last number is the diameter of the rim (wheel) in inches. in this example it would be 12" Some ATV tyres may not have any load speed index marked on the sidewall, but most e-marked tyres will show the load speed index. The load speed index is usually clearly marked on at least one of the sidewalls of the tyres. Bar Cutting - We specialise in short lead times and high volume production. To achieve this we use a range of CNC controlled twin pillar type bar saws, cutting to a maximum diameter of 12". We also have the facility to cut tubes and sections (Close tolerances available upon request). Finding the correct tyre for your ATV involves knowing the correct tyre size. The size is usually written on the sidewall of the tyre and can be displayed in a number of different ways. We have detailed an explanation of how the different methods of measuring the tyre can be written below:There is more to choosing an ATV tyre than just the size required. ATV tyres are made and tested to work under certain criteria and limitations and the marking found on the sidewall of the tyre, all help choose the correct tyre for the application. Maximum Inflation Pressuresshow what the maximum pressure that should be used to 'seat the beads' of the tyres onto the rim. ATV tyres are notoriously difficult to fit and it is tempting to inflate the tyre pressure far beyond the maximum pressure marked on the sidewall. This can cause premature failure of the structure of the tyre and is something that should be avoided at all costs. The use of the correct tyre lubricant and fitting equipment is always recommended to ensure the safe operation and continued reliability of the tyre. Operating Pressure shows what the optimal tyre pressure is to use in the tyre. If the tyre has a load speed index, the operating pressure is where the maximum load and speed are achieved. Inflating the tyre beyond the recommended operating pressure will not increase the carrying capacity or performance of the tyre.