Brighten up your garden with Cuprinol Garden Shades Paint. With a wide selection of colours available you will be able to easily redecorate your garden to your liking. Smooth wood -Brush 10-12m2 per litre ,Spray 4-5m2L ,Rough sawn wood - Brush 3-5m2 per litre ,Spray 2-3m2 per litre Scottish Highlands: AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50 Before you begin, make sure that you always stir the product thoroughly before emptying the contents into the sprayer and refer to the sprayer instructions for full instructions before every use. Before you begin, ensure that any nearby areas have been covered encase overspray occurs. Any overspray that may occur should be cleaned up immediately with water and household detergent. As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure.

Cuprinol Garden Shades | Cuprinol Garden Paint | Wickes Cuprinol Garden Shades | Cuprinol Garden Paint | Wickes

This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. Specially designed to colour, protect and brighten up your garden furniture, shed & fence. Cuprinol Garden Shades allow the natural texture of the wood to shine throughStir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Beautiful matt colour which enhances the grain of natural wood, with 6 year weather protection on wood

Cuprinol Garden Shades | Paint | Wilko Cuprinol Garden Shades | Paint | Wilko

MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. Cuprinol Garden Shades Beaumont blue Matt Wood paint 0.05L.You can apply this wood paint from the Cuprinol Garden Shades range to using a brush roller or spray to colour and provide protection. It takes 8 hours to dry and will cover up to 12m² per litre on average. Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood. Coverage on smooth wood using a brush is 10-12m2 per litre, coverage on rough sawn wood using a brush is 3-5m2 per litre