a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof. You can use the switch to select OFF, SHORT (characteristics of a cable of approx. 3 meters), and LONG (characteristics of a cable of approx. 6 meters). Don't expect any signal drop-outs as the Boss wireless system works in a 2.4 GHz frequency for great audio. Ultra-low latency also prevents a lag between playing and the amp producing sound. Cable sound recreation This can be an issue with low-end digital wireless units, which typically only have 3-4 channels to choose from. If these channels happen to be very heavily in use, then you may experience severe dropouts and interference when you least expect it. a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").

This is wireless systems made easy. Boss introduce the WL-20 - simply need to plug in and get playing. No frequency changing issues, just really simple, intuitive tech to give you peace of mind plugged into an amp. Key Features You can use any of the three (the WL-20, WL-20L, or WL-50), but we recommend the WL-50, which lets you switch the CABLE TONE feature. Charging simultaneously with the transmitter: Approximately 4 hours Expected battery life under continuous use Approximately 7hours Have you always dreamed about going wireless with your instrument, but were put off by the complicated setup, tone loss, and bulky adds-ons? If so, the WL-20 series is for you! Driven by new lightning-fast BOSS tech, these ultra-compact music tools deliver premium sound and plug-and-play operation that completely eliminates all the hassles normally associated with wireless systems. hours charging time will give you 12 hours of battery life for the transmitter, and 10 hours for the receiver.Battery charging time: Charging only the receiver - Approximately 3 hours, Charging simultaneously with the transmitter - Approximately 4 hours

WL-20 also features built-in cable tone emulation, which reproduces the tone of using a 10 foot guitar cable. In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors. c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer. These figures will vary depending on the actual conditions of use. Size and Weight (TRANSMITTER (WL-T)) Width 87 mmUnauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.

With cable tone in the OFF position, the WL-50 is suitable for use low impedance sources such as guitars with active preamps. This is the same as the WL-20L. Supplied from the DC IN 5 V port Current Draw 350mA Battery charging time Approximately 3 hours Expected battery life under continuous use Approximately 12 hoursoz Specifications (TRANSMITTER (WL-T)) Nominal Input Level -10 dBu (1 M ohm) Indicator BATTERY Connectors Input plug: 1/4-inch TRS phone type

On the WL-50, you can use the CABLE TONE switch to select OFF, SHORT (characteristics of a cable of approx. 3 meters), and LONG (characteristics of a cable of approx. 6 meters). A WL-20 system is literally as simple to use as a standard guitar cable. The small transmitter plugs into your instrument, while a matching receiver plugs into a pedal or amp. That’s it! Automatic Wireless SetupRoland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE. c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.