Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so

Reconnect the printer to the network: Place the printer within range of the Wi-Fi router signal, and then connect it to thethat it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer

Reconnect the printer from the wireless settings on the control panel (if available), use Wi-Fi protected setup (WPS) with intermittent, restart the router by disconnecting the power cord, waiting 15 seconds, and then reconnecting the cord. Print quality is above average for an inkjet, with slightly above-par text, graphics, and photos. Although the OfficeJet 200 is a mobile printer, its output quality is better than that of most desktop inkjets we've tested. Text should be good enough for any use short of those requiring tiny fonts. Where special offers provided by Printerland and/or the manufacturer applies, the competitor must also be providing the same offer/s for the We can't directly compare these results to those from printers that we tested on the business part of our old test suite, which included a higher percentage of complex, graphics-heavy documents. Photo printing is a different matter, however. The 200 Mobile proved much faster than machines we'd previously tested, printing out 4-by-6 photos in an average of 42 seconds, far faster than the HP OfficeJet 100's 3:08 and very similar to the 40 seconds at which we timed the OfficeJet 250.Restart devices: Restart the printer and the computer or mobile device to clear possible error conditions. Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect Printers without a touchscreen control panel: Press and hold the Wireless button for five seconds or until the wireless light starts to flash. Within two minutes, press and hold the WPS (Wi-Fi Protected Setup) button on the router until the connection process begins. The printer Wireless light stops flashing