Cutting discs come in a number of configurations, with varying materials, sizes, and grain sizes to suit the needs of demanding professionals. All cutting discs are made from strong compounds, bonded together using powerful substances.

Types of Angle Grinder Discs and Their Uses (With Pics) 10 Types of Angle Grinder Discs and Their Uses (With Pics)

Just by switching different discs in and out of the tool, you can use your angle grinder for a variety of applications. You can cut, grind, polish, carve, and more. What types of wood can wood cutting discs handle? You should have no problem slicing a quality disc through pine, cherry, walnut, oak, mahogany, maple, or any other wood you can name. 10. Wood Carving Discs A die grinder is a small, handheld power tool that is sometimes referred to as a rotary tool. It has a rotating spindle where a sleeve is used to tighten a bit to the end. For example, a sanding bit can be attached that will rotate at a very high speed and is used to smooth or remove material from your wood project. Now there are several different sanding bits, so the bit you use will vary depending on the need. Keep in mind too, there are many different bits, for many different purposes which we’ll discuss.Not sure about the right cutting disc for your applications? Feel free to get in touch with our experts, who offer free, professional advice to help you find the right products for your usage. With the right discs, your angle grinder can not only handle metal but can even grind or polish concrete. Cutting discs are used in smaller cutting power tools, such as angle grinders and die grinders. They are invaluable for use across a large range of industrial applications and industries, including:

Power Tool Accessories | Tools | Screwfix Power Tool Accessories | Tools | Screwfix

Because carbide teeth are so hard, they can make clean cuts through both softwood and hardwood. Not only that, but you can get a lot of use out of them before you need to sharpen or replace them.If you are working with masonry or stones, a regular grit disc or cut-off disc won’t cut. You will need a diamond cutting disc which is a superior alternative. As the name implies, diamonds grits are embedded into the edges of a steel disc. An angle grinder is sometimes referred to as a disc sander or a side grinder. Its name describes how the tool looks; the head of the tool is at a 90-degree angle from the shaft of the tool. An angle grinder is a handheld power tool that has a rotating disc approximately 4 to 5 inches in diameter. Its main use is for grinding and polishing. Remember, your safety is YOUR responsibility. Only you can make it happen. Always play it safe at the wheel. As with the die grinder, there are many uses for the angle grinder. As was stated before, its primary function is polishing and grinding, but that can be applied to a variety of materials and projects. It also can cut and sand if you use the appropriate disc. So, depending on the material you are working with and the task you are wanting to complete, your angle grinder will be able to complete the task as long as you attach the correct disc. The thin design of cutting discs gives users a degree of cutting accuracy that is highly valuable in metal fabrication. Their thin profile makes them far more precise and clean cutting than equivalent grinding wheels, or other types of abrasive discs.

50/60/76 mm cutting discs for die grinders Abtec4Abrasives

A variety of different types of polishing pads are on the market. You will need to choose a material that is right for the surface you are working on. For fine surfaces such as polishing your car, get a buffing wheel made of wool. Pete has been working in the trades since high school, where he first developed a passion for woodworking. Over the years, he has developed a keen interest in a wide variety of DIY projects around the home. Fascinated by all sort of tools, Pete loves reading and writing about all the latest gadgets and accessories that hit the market. His other interests include astronomy, hiking, and fishing. Dan Miller is a professional toolmaker with extensive experience in the metalworking and tooling industry. Worried about a flap disc overheating? You can try a ceramic sanding disc as an alternative. 5. Wire Wheels With this shape, this type of disc is especially ideal for creating a concave surface—say, for example, if you are carving out the interior of a wooden bowl.A wire wheel is not your only option to remove paint. An alternative wheel to consider is a paint stripping disc. Each disc features an abrasive compound consisting of grains and a bonding agent. You can choose a higher or lower grit depending on how fine or coarse you want the abrasive grains to be.