This bearing features higher quality steel races with better quality and grade balls and a superior surface finish. If you’re short on cash and want to buy a longboard just for entertainment, steel is the best choice. The main purpose of the bearing is to reduce the friction among both the axle and the wheels and the steel bearing shines in this area to make your longboard run smoothly. Steel bearings are successful since they are flexible and long-lasting; they can also withstand rust and corrosion. Ceramic Bearings The ABEC rating is a measurement used to evaluate the accuracy, tolerance, and physical limits of bearings. The tolerance of bearings determines how precisely the components fit together, with tighter fits leading to smoother and more efficient operations at higher speeds. We haven’t cleaned them in a year and skated them in all conditions, they still work. I guess some of the marketing is actually true, I’m still allergic to buzzwords though.

The bearing balls are held by a plastic retainer than holds 6 to 7 tiny balls. They are evenly spread and roll along the inner and out race. This makes the inner part of the bearing rotate.On the other hand, non-standard bearings are somewhat different from 608 and seldom seen on the market. If you need these bearings, you would need an alternate sleeve to match perfectly with the regular 608 outer diameters. Lubrication That’s a whole lot of fancy words that can be summarized as cheap bearings that last a long time. Where we had to replace our bones Reds, the G2’s still worked for a long time. Load Capacity: Load capacity refers to the amount of weight and pressure that the bearings can handle without compromising performance. Riders who engage in downhill or freeride longboarding where higher speeds and greater forces are involved may require bearings with a higher load capacity. Bearings with a higher load capacity often have stronger construction and utilize materials that can handle heavier loads. As a result, these bearings tend to be priced higher than those with lower load capacities.

The bearings are pre-lubricated with Arch-oil Nanoceramic Grease, which seems to be a high-quality lubricant that makes the bearings less resistant. The weather and temperature will have no impact on the bearings and they will remain consistent in any circumstances. Finish: The finish of longboard bearings refers to the quality of the surface and the precision of the manufacturing process. Bearings with a smoother finish tend to offer reduced friction, resulting in better speed and overall performance. Higher-quality bearings undergo more precise manufacturing techniques and polishing processes to achieve a smoother finish, which can contribute to their higher price compared to bearings with rougher surfaces.The consistency of the steels will not rust under any environmental conditions and will remain polished, giving your board a perfect look. Removable Rubber Shield However, when you're just starting out, you wont notice much difference between entry-level bearings like the Bones Reds or Bronson G2 Bearings and more expensive ceramic bearings as you wont be maxing out the bearing performance. Instead, focus on choosing a trusted brand with a reputation for producing high-quality and durable bearings that you won't have to replace or clean too often. Finally, because of the small tolerances, high precision, and strict manufacturing process, industrial bearings are also ridiculously expensive. This is and will be quite impractical for your wallet, especially if you replace your bearings every few months. Bearing lube shouldn’t really be a determining factor when buying a bearing, but you should take it into consideration when choosing what lube to maintain them with.