No studies were done to confirm the safety of the device during pregnancy so it’s best to stop using it, just in case. Due to its ability to stimulate collagen production, RF technology has been shown to improve fine lines, improve mild sun damage, and even improve facial firmness! Ultrasound technology for anti-aging Ok the Tripollar is not that bad, but on a scale of 0 to 10 the Stop X would be a 3 while the Medicube would be a 0.2. I’d say 0, but you can feel some warmth, but it’s nowhere near unpleasant, and it definitely won’t make your skin red! ✅ Targets all my problematic areas safely

Although the manufacturer (Pollogen Ltd) say results with the STOP VX are better, they don’t say by how much and there’s no available clinical comparison of the results from each. After 6 to 8 weeks, you then switch to less regular maintenance sessions. Tripollar suggests them either weekly or once every two weeks (so, 2 to 4 times per month). These sessions are much easier to fit in, and it’s one of the least effort maintenance schedules. But it’s so easy to skive off! So, you must remember to schedule the time with yourself. Saturday mornings are my favourite time. Advertised results We do not recommend use of our devices if you currently have or have a history of cancer- especially skin cancer or premalignant moles. Focus on 3 treatment areas of your face: left cheek, right cheek and forehead. Apply a thin layer of the conductor gel. Move the device in a very slow circular motion on a small part of the treatment area. Once the orange indicator light illuminates followed by a ‘beep’ sound, you have reached the optimal temperature. Continue the same slow circular motion for a few seconds, then gradually enlarge the movements in the treatment area. Do this for 5 minutes. Then repeat in the next treatment area. Who Shouldn’t Use Tripollar

Immediate results the next day: Maybe it was from using the sheet mask after the tool, but my skin always looked brighter and just healthier. Even more so compared to just using a sheet mask without the tools. This review tests the two Tripollar STOP VX models; VX, and VX Gold edition. A newer STOP VX Gold 2 & VX 2 are now available. What is it? For a week by week breakdown, I recommend reading my Stop X review as the results are very similar. As my nasolabial folds are is where I have the most noticeable sagging skin, I saw noticeable lifting and plumping at around the 8-week mark. In terms of plumpness and firmness I’m pretty much maintaining my results from before. Because the sensation was so jarring, I began dreading the DMA mode, and eventually I just stopped using it. However if you have a higher pain threshold, it will make a noticeable difference to your jawline. Tripollar Stop Vx vs Tripollar Stop X The start-up treatment schedule is the same for all Tripollar models. You do an RF session roughly every other day (2 or 3 times per week) for 6 to 8 weeks. So, this schedule requires commitment.

So, I use the STOP mostly 3 times per week with a total of 21 sessions over 8 weeks. Each evening session leaves my skin pinky-red and feeling invigorated, plump and smooth. But the next day it’s SUPER smooth. It takes around 4 weeks to see changes in my skin 👇. 4 to 6 weeksAs one of the most effective devices in the market, the innovative TriPollar Stop VX uses Multi-RF and DMA technologies together to provide extraordinary results: lifting sagging skin, plumping and tightening, reducing wrinkles, softening the skin, detoxifying and oxygenating, and sharpening the jawline contour. Therefore, it’s best to set aside a quiet and unrushed hour every few days. And if you have this time and motivation, it’s a pleasant way to pamper your skin. You can also do it whilst watching TV. For your nasolabial folds, move the device slowly from the bottom to the top of the fold in one linear motion. Repeat 10-20 times. What they fix: Smooths texture, tightens pores, plumps skin reducing fine lines & wrinkles, tightens loose skin around facial contours jowls, chin, jaw & eyes, and refreshes for firm, supple, glowing, younger-looking skin. Some users do feel changes in their skin before 6 weeks such as smoothed texture, tightened pores, and brighter skin. Then, wrinkles gradually soften, scars fade, skin plumps and tightens, but with best results at 6+ weeks. And I like that there’s no “false summit” where you’re encouraged to keep going to see even better results (ahem, Nuface).

Obviously the levels from a at-home facial device won’t be as strong as what you’ll receive from a dermatologist office, but the technology itself is definitely promising. Keep reading for proof. My Tripollar Stop X reviewOne downside to the Tripollar Stop X is that it needs to be plugged into a wall outlet to work. This makes your mobility limited while using the device. How Many Times A Week? Due to its ability to stimulate collagen production, RF technology has been shown to improve fine lines, improve mild sun damage, and even improve facial firmness! Cleanse and Prep: Clean and dry your desired treatment area, then apply a thin layer of TriPollar’s Preparation Gel. This is a smarter, more responsive temperature sensor which continuously reads your skin temperature and adapts the RF power as it’s needed. This is good because you have different types and depths of tissue all around your face. The sensor gives a more even and accurate RF delivery around your different facial contours.