On installation: Screw the insert in the hole with loctite to the desired location. Let the insert set up with the loctite before running the insert driver tool through the insert. The loctite will prevent the insert from going to deep into the prepared hole.

TIME-SERT makes no claims on torque specs or pullout, nor do we provide them. The reason being there are many factors that can determine the end result of the insert thread strength. One being the installation process. Yes, loctite may be used on the external threads of the insert, due to the solid wall design there is no danger of it leaking thru to the internal threads.Ford spark plug Repair kit p/n 5553 to repair blown out sparkplug's. Ford Triton Sparkplug repair kit includes all the tools and 5 inserts. A TIME-SERT is a solid-body thread insert offered by Time Fastener Company. Some of the features that make TIME-SERT a good choice for many stripped or damaged thread repair applications include... The video example shows the speed in which TIME-SERT inserts can be installed in a blind hole applications using a pneumatic push pull tapper. To our knowledge there is no insert on the market that can be installed faster in a hand volume application where a specific depth is required. The insert in the video is a M10x1.5x14mm. Once the insert is seated, reverse rotation of the tap handle to remove the installation tool driver from the installed Time-Sert. TIME-SERT® is a solid bushing insert. This guarantees easy installation and allows for full load use of tapped hole, ensuring protection against stress and vibration.

NOTE: Try to not bend over the tool or bottom the driver out in the hole. We suggest using a tap handle wrench when installing. S.T.I stands for "Screw Thread Insert" an example would be a TIME-SERT M8x1.25 repair kit would require a M8x1.25 S.T.I tap, this is "larger" than a standard M8x1.25. Because the external thread diameter and pitch is determined by the dimensions of the internal thread of the insert, the resulting external thread does not correspond with a standard tap size. The tool kits listed are the "Internal size". Metric Example: If your bolt is M6x1.0 and your stripped thread is M6x1.0 you will need a M6x1.0 thread repair kit. Inch Example: If your bolt is 3/8-16 and your stripped thread is 3/8-16 you will need a 3/8-16 thread repair kit. TIME-SERT will state that if the thread repair is done correctly and with the proper length of insert used for the application e.g. the insert is the same length of the original thread engagement, the result should be a hole that should match the original torque specification of the hole.

THANK YOU

This simplifies installation and produces a strong, permanent repair by allowing the full torque of the fastener to be applied to the repaired threads. Why does the installation of a Time-Sert require the use of an STI tap? What is an STI tap? Can a standard tap be used instead? If multiple inserts need to be installed this can also be done using a CNC with a tapmatic reversing head. No! Because the oversized drain plug has oversized the hole in the drain pan making it larger, so the insert will not hold properly. The 1485 kit will work by reducing the hole from M14x1.5 to M12x1.5 there is no drilling because the tin pans are to thin and the thread would break out entirely. So no oversized drain plugs in tin pan repair. What is happening is the plating is slightly heaver on some inserts that is why it will feel tighter when screwing inserts on driver tool by hand.

that you "do not" want to bottom out the driver tool on installation. There is a simple method to safeguard against bottoming the tool out, by placing a visual mark the driver tool. and mark the tool at the point it can't enter any further. Use a ink marker or even use a small strip The diameter of the spark plug will be the size. The threads or pitch will be a standard for the diameter. Example if the diameter is M14 the standard pitch will be 1.25 or M14x1.25. Yes Spark plug repair can be done without removing the head by placing a heavy grease on the step tap flutes to catch the chips. TIP: mechanics have mentioned that using a shop vac with a plastic tube taped to the nozzle end works well for removing any stray chips left over.

Time-Sert Product Catalogues

Apply oil to the insert driver to help lubricate it and to minimize the chance of galling the threads of the insert during installation. After the hole is drilled, counterbored, and tapped... clean the hole so that it is free of chips in preparation for installation of the insert. Was the insert actually installed correctly using Time-Sert tools and square to the hole? This would have a huge effect on the outcome of the torque specification. Along with what type of material being inserted, plastics will not have the same torque values as aluminum's, steels, or cast irons. Another thing to keep in mind is the length of the insert. Inserts must match the length of the bolt threading into the hole. Too short of an insert length could result in thread failure. Example. The blind hole depth for a 5/16-18x.450 should be a minimum of .700 inches or 17.8mm deep. Stainless steel is recommended for the medical or food industry, and water applications or where there may be exposer to the elements as in disk brakes.

Würth offers you several thousand variations in our range of professional tools to meet all the requirements of your business. For more than 50 years, we have been developing state-of-the-art professional tools which are synonymous with innovation and quality. Mechanics, carpenters, landscapers, plumbers and many more professions can increase their productivity and meet the needs of your customers with our range of high-quality professional hand tools.‎ Time-Sert achieves its thin-walled cross-section due to synchronized internal and external threads of the insert.

Your Remedy if You Need to go Bigger or You Have to Fix a Stripped Helicoil or Time-Sert

When you get to top dead center you won't feel anymore pressure use a wire hanger put down the hole. Customers have found in their own testing data that TIME-SERT’s have exceeded their expectations. Many of our larger customers will test TIME-SERT’s before placing them in critical applications and find excellent results.