You will maintain bud functionality, but remember you will lose some of the media control functionality such as “Volume +/-“, and “Track <>”, depending on which bud you are using in Mono Mode. When pairing to your Sesh®️ Evo, be sure to ONLY select the product name from the available device pairing list (it will appear exactly as "Sesh Evo").

Issue: If you would like to use the SESH® EVO with only one earbud (audio will switch from Stereo Mode to Mono Mode), you’re in luck! While this may seem obvious, overlooking the protective plastic on new earbuds happens more often than you’d think. You will hear a tone to indicate the sync was successful and ONLY the LEFT bud will begin to flash RED/BLUE.

The LED indicator on the earbuds will blink red when the battery is low (below 30%) and needs charging and will display a Solid red light if out of battery (no light may also be displayed when out of battery).

The charging case isn’t the largest I’ve ever seen, but its wide, boxy shape makes it awkward for pocketing.Latency refers to the time it takes for the audio signal to be transmitted to your headphones/earbuds. There is up to 5+ hours of play time in the earbuds, and up to 19+ hours in the case, allowing up to 24 Hours of total play time. You’ll find the USB-C charging port on the backside, while a small button on the front lets you momentarily trigger the four-LED charging indicator to see how much juice is left in the case. The lower-register instrumentation takes a step forward in the mix and can sometimes sound a little tubby, but the higher-register brass, strings, and vocals retain their crisp, bright presence.