Spacers and gap fillers, as the plastic strips can sit between two edges or slide underneath an edge to fill a gap. Credit subject to status, UK residents only, Euro Car Parts Limited acts as a broker and offers finance from PayPal Credit. Then sand the area by hand with 80 grit sandpaper to remove raised or sharp edges and leave a somewhat rough finish – this will give the filler something to bond with.

To finish the plastic bumper repair and prepare for the primer, the use of a plastic filler product is recommended. The filler is supplied complete with the necessary fast epoxy hardener which will cure the filler in around 2hrs. Fast curing, black, two-part filled epoxy repair filler with excellent flexural strength and excellent bond strength.Changes in temperature will cause the adhesive to expand and contract and pull away from the sharp edge of a “V” groove causing a ghosting line to appear.

uk/" target="_blank" class="b-button__primary d-block mb-10 h-100 d-flex align-items-center justify-content-center">

Related: