Pracovní stůl je pevný a rovný. Pro řezání velkoplošných materiálů je samozřejmě potřeba pilu umístit do nějakého na míru vyrobeného stolu, ale to není žádný problém. The DWE7485 on the other hand is just under €500 (but cheaper in the US), quite a step up from the other two saws. This means it will have to have some serious improvements over the other two saws to be good value for money. The Bosch GTS 635-216 table saw is a compact saw with large cutting capacities. The redesign of the motor/gearbox configuration maximises the cutting height from the 216mm blade. The result is a highly portable saw bench with a maximum depth of cut of 70mm and a cutting width of up to 635mm. Something similar is going on with the size of the two saws. The GTS 10 XC is clearly bigger, with a table of 584 x 759 millimeter, compared to the 500 x 658 millimeter of the 635-216. Likewise, if the miter gauge has some play (meaning it can move laterally in the miter slot), you can never rely on crosscuts being exactly 90 degrees. And if the table isn’t flat, or the body is deformed in some other way, it will be difficult to make repetitive accurate cuts as well. Fences compared

It is a clear improvement over the old PTS 10, which was limited by its build quality. It is therefore no surprise that the GTS 635-216 is now one of the most popular table saws on the market in Europe. Total Tools reserve the right to change or withdraw free delivery at any time. Estimated Delivery Timeframes However, the rip capacity is actually the same on both saws! Both the GTS 10 XC and 635-216 have a rip capacity of 635mm. This rip capacity also explains the other part of the name (635). The GTS 10 XC is significantly heavier at 35kg, compared to 22kg of the 635-216. To find out exactly how they all differ in a meaningful way, I’ll compare them along three categories: Accuracy, size and power, and build quality. Accuracy Where the GTS 10 XC does have a clear advantage, however, is in terms of power. Its 2100 Watt motor will help with cutting tough hardwoods like oak and maple. Especially when you get close to the maximum cutting height, the extra 500 Watt compared to the 635-216 (1600W) can be really helpful.That being said, the Bosch does seem to be the most plastic-y of the three. But it also has more body, while the other two have more of an open body design.

Conclusion: Overall, the Metabo has an advantage in dealing with solid wood, thanks to the larger saw blade. The DeWalt and Bosch on the other hand are slightly better if you plan on cutting large sheet goods. Build Quality While the GTS 635-216‘s miter gauge is made of plastic, the DWE7485 supplies a metal miter gauge, which feels like it will last for longer. The DeWalt’s miter gauge also has some holes to which you can add your own wooden or metal bar to make it bigger and more stable. The 635-216’s gauge does not have this.So, given the larger and heavier table, your workpiece will be better supported on the 10 XC. But if you really want to, you can make the same large cuts on the small 635-216 as you can on its larger brother. 635mm is large enough to cut a standard sized plywood sheet in half on the short side. Power This means the Bosch and DeWalt are capable of cutting standard sized plywood sheets in half, which is not possible on the Metabo. But it is also more than twice as expensive. This makes the GTS 635-216 very good value for money. It may not be as well built, or have as unique features at the 10 XC, it can cut almost the same height and rip the same width. With some attention, you can achieve the same results on the 635-216 as on the 10 XC, but for less than half the money. As a result, the 635 can cut up to 70mm high, compared to the 79mm of the GTS 10 XC. This difference is actually surprisingly small. Most 216mm saws can cut less than 70, and most 254mm table saws can cut higher than 79mm. In this case, the bigger machine doesn’t have a big advantage.

In contrast, the GTS 10 XC offers a unique sliding table mechanism, as well as a solid miter gauge. The gauge has an extra metal support bar and positive stops to remember specific angles. The sliding table runs over two linear guides and helps with crosscutting. Sliding table in actionJediná vada na kráse byla, že vnitřní část s motorem byla pro účely přepravy výrobcem fixována umělohmotnou páskou, která se ovšem během přepravy přetrhla, takže motor + vnitřní pohyblivý mechanismus měl možnost se mlátit sem a tam. No ale po prohlídce se naštěstí nic nepoškodilo. With a saw blade diameter of 216 millimetres, it is the best in its class. This is based on the special design of the new table saw: The arrangement of motor and gearbox has been optimised so that the saw blade protrudes further than with conventional table saws ‒ and thus achieves more cutting height with a smaller blade. Pila je skutečně o několik úrovní nad těmi, které jsem dosud měl. Umožňuje přesné a spolehlivé řezy, protože se všechny parametry dají přesně seřídit. Výkon motoru je dostačující, nastavení bočního dorazu je opět velmi jednoduché a exaktní a doraz je fixován jak zepředu, tak i ze zadní strany. The particularly stable rip fence made of die-cast aluminium ensures high precision: It is attached to the front and rear of the table saw with a double clamp and thus sits reliably with every cut.

Total Tools reserve the right to terminate or amend the price guarantee policy at any time without notice. For Further InformationThe sliding table does cost about €100, but even then the TS 254 M comes in cheaper than the DWE7485.