Make sure you keep your dust sheet down. Spillages do happen, and it’s easy to tread door paint all over the place before you know it! Before you start painting, ensure you follow these key preparation steps to achieve the best end result: Painting our front door didn’t take that long, it’s the prep that takes ages. And waiting for the paint to dry before recoating. How Many Coats Does It Take To Paint a Front Door?

Large, flat surfaces can be a challenge to paint evenly. Whether you are using brushes, a roller or a sprayer, it’s good idea to have practised your technique beforehand to ensure that you’re confident when working on your front door.Curing is a progressive process, which can take up to three weeks for the paint to fully harden. Treat the painted surface with care during this time.

Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete. For ferrous metal, treat rust, remove any loose or flaking coatings and sand smooth - in these circumstances, we recommend 2 coats of Frenchic Finishing Coat as a base for the paint. A 750ml tin will provide a single coat of up to 12.5m 2. For a durable finish, a minimum of 2 coats is required, so your 750ml tin should provide full coverage for just over 6m 2 on non-porous surfaces like laminate or metal. Limited Edition 500ml tins will provide a single coat of up to 8. 5m 2 . Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.

Subscribe to our newsletter

Tape around any areas you don’t want to paint, using masking tape. The tape keeps the window free of paint. We painted the frame of the window too, on the inside… And just the door of the outside. Make sure you leave the door open as long as you can before closing it. Painting Tips for a Good Finish AlFresco Inside/Outside Range εάν το επιθυμείτε να κάνετε τεχνοτροπία με τα κεριά Frenchic Waxes, stencil, ζωγραφική ή άλλη τεχνική. I used the Dusky Blush Al Fresco paint on our kitchen door and it was a dream to paint with and gives a gorgeous matte, smooth finish. You just need to clean the door with sugar soap, lightly sand, wipe off the dust and paint. Be careful with it for a few weeks as it hardens up or ‘cures’.

I get lots of comments from people who are amazed that it’s possible to paint uPVC as it’s made of plastic. As you can see, it is possible, but it does take time and patience. If you’ve ever wondered how to makeover your uPVC front door using paint, read on for my guide on how to transform an old plastic front door. Breathable, chalk and mineral paint formulated for walls. Also suitable for internal woodwork, powder coated radiators, wall tiles (we recommend avoiding very wet areas like shower/bath surrounds). Here is some useful information about painting tiles. Also wood, concrete and most laminate floors with correct application – please note maintenance may be required in these situations. Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint.

Start early in the morning to give the door maximum drying time before you have to replace the door furniture. If your door is exposed to the elements, and not enclosed in a porch, then you will need a suitable durable and weatherproof paint. For ease of application and speed, a self-priming paint is perfect. Many paints require a primer, which means buying extra products as well as adding time to the project. Self-priming paints – like the entire Frenchic range – cuts out that hassle and expense. What about colour? A 2.5l tin will provide a coat of up to 35m 2. For a durable finish, 2 coats are required, so your 2.5l tin should provide full coverage for approximately 17.5m 2 on non-porous surfaces. Thinner application may affect durability. Porous surfaces will affect the rate of coverage and require additional coats.