Depending on what type of hinges you have will depend on how they are fixed. Some hinges have no adjustment and simply fix in one position and if this is the case for yours then simply position them over the fixing plugs, insert the screw down through the hinge and into the plug and then screw it up. Yes as above, remove seat, remove chrome covers, remove long bolt - all from above the loo so access isn’t a problem

In some cases, the nut won’t loosen which means you need to use penetrating oil or WD40 to lubricate both bolts. The penetrating oil is used for rusted bolts and nuts.d shape toilet seat]: with adjustable hinges, the white toilet seat fits most d-shape toilet seats. cover: 454x361mm(lxw); inner circle of adult seat: 290x217mm(lxw); inner circle of child seat: 230x158mm(lxw) Begin to cut gently moving one side to the other. Cut through to the other side of the toilet seat. Fitting a toilet seat using top fixings is fairly similar to a bottom fix seat, with the difference of exactly where the fixings are located. Follow the steps below to fit one: Step 1 – Insert Top Fixing Plugs One type of plastic toilet seat that deserves a special mention is the resin seat. This is due to the fact that they differ slightly in that resin is slightly tougher and harder wearing than standard plastic and, apart from a massive range of different colours and styles, they can also have images and objects inset into them.

To find the correct hole, loosely screw the studs in and position the seat in place and ensure all points above are met. Fitting a new toilet seat is basically a reversal of the removal process. Make sure that the nuts are secure but not overly tight, as the plastic screws will not take a lot of punishment before they give way and strip the threads or snap. If there are plastic caps over the nuts, use your flathead screwdriver to remove them. This can be more difficult for older seats if they have sat there for some time. Work your way around the cap, not being too rough to damage the toilet itself, to carefully remove the caps. Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. If you have metal fixings these can be a little different and may need fitting from below. If you have any doubts then refer to the manufacturers fitting instructions that came with the kit. Step 2 – Position and Fix Hinges

Quiet closing - no more slamming wooden toilet seats and waking up the whole family! benkstein soft close toilet seat fittings is ideal for standard smooth and quiet closing, without any noise Square: Arguably the most modern type of toilet and seat, they suit modern properties and design schemes. Due to they’re sharp angles they are a little larger so suit larger more spacious bathrooms Fixing (domed, stainless washers, fixing nut and bolt): Connects to the hinge plate and fixes everything to the toilet pan Frequently Asked Questions Of Why Are Toilet Seats Removable? What Is The Purpose Of A Removable Toilet Seat?

For most top fixing toilet seats, the seat and hinges are supplied separately and fitted as described above, however with a few kits, the hinges come fitted to the seat. To install the new toilet seat, thread the new nut and retainer through the holes in the toilet pan, and then tighten them with a screwdriver before fitting the new toilet seat. Most toilet seats are an oval shape, although some may be more of a contemporary square or D-shape. So, it is important to remember this when looking for a replacement in a shop or from the original manufacturer.In this informative guide, we will delve into the reasons behind the removable design of toilet seats and explore the practical benefits they offer. From easier cleaning and maintenance to personalization and convenience, understanding why toilet seats are removable will enhance your appreciation for this common bathroom fixture. Part 1: Cleaning and Sanitation