Coverage: Up to 14m2 / litre. Coverage may vary depending uponmethod and rate of application and porosity of surface. Coverage for Metallic Finish: Up to 2m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface. Preparation: Remove oil, grease, and all other surface contamination by cleaning with appropriate detergents. Remove loose rust by scraping and wire brushing or sanding. Lightly abrade UPVC, remove any dust and wipe with methylated spirit.

Application: Stir thoroughly before use. The product may be appliedby brush or roller. If applying by brush, apply evenly, following the grain surface afterwards with water. If wax or oil has previously been usedon the item, clean the surface thoroughly with white spirit. If paintingover a hard or glossy or previously painted surface abrade the surfacebefore application. Renovate and transform your kitchen with Rust-Oleum KitchenCupboard Paint. An ultra durable, scrubbable and water resistant,flat matt finish for kitchen cupboards.

Drying Time: Touch dry in 1 hour. Hard dry in 4 hours. May be overcoated after 4 hours. Full cure achieved after 7 days - take extra care Preparation: Ensure surface is clean, dry and free from contamination.Use sugar soap equivalent to remove all traces of contamination, rinse Clean Up: Remove as much product as possible from applicationequipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for thedisposal of waste coatings. Drying Time: Touch dry in 4 hours. Handle after 8 hours. Apply a second coat after 16 hours (if necessary). Full hardness is achieved after 7 days. Ensure application conditions are favourable for painting, we recommend that the temperature is between 10⁰C - 32⁰C with a maximum humidity of 80%, do not apply in direct sunlight or if conditions are humid. Limitations: Store in a dry, safe place. Do not store paint in environments where extreme temperatures may occur. Keep within 5-30°C. Do not store in direct sunlight. Whilst every effort is made to ensure the accuracy of colour, due to limitations of the print process, colour / finish shown is for guidance only.

Clean Up: Remove as much paint from brushes as possible before cleaning. Clean with a suitable brush cleaner or soak in white spirit for 5-10 minutes, rinse and dry thoroughly. Coverage for Matt/Satin/Gloss Finishes: Up to 10m²/litre. Coverage may vary depending upon method and rate of application and porosity of surface. Application: Stir thoroughly before use. Thinning is not required. Apply 1-2 coats with a brush or short pile mohair roller. For roller application lay off immediately with a brush. Some food items may stainthe product, remove any spills immediately to stop this or minimize theeffect. Not suitable for use on a bath or any surface regularly immersedin water. Temperature at time of application and during drying should begreater than 10°C.